ENGLISH EN
DESCRIPTION
A Spray button
B Steam blast button
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate
• Read these instructions carefully before
these instructions may result in an accident.
USE AND CARE:
•
each use.
• Do not use the appliance if the accessories at-
tached to it are defective. Replace them imme-
diately. Do not use the appliance on any part of
the body of a person or animal.
• Do not use the appliance on pets or animals.
• Do not use the appliance to dry garments of
• Turning the thermostat control to the minimum
(MIN) setting does not guarantee that the iron
INSTRUCTIONS FOR USE
BEFORE USE:
•
•
been removed.
• Some parts of the appliance have been lightly
greased, consequently, the appliance may give
• Prepare the appliance according to the func-
FILLING WITH WATER:
•
•
•
level (Fig. 1).
•
USE:
• Unroll the cable completely before plugging it
in.
• Connect the appliance to the mains.
• Turn the thermostat control to the desired tem-
perature position.
• Do not use temperatures higher than those in-
dicated on the garments to be ironed.
(Polyester, Nylon…).
Max Temperature for linen.
•
temperature for polyester for a fabric made out
of 60% polyester and 40% cotton).
• Wait until the pilot light (F) has gone out, indi-
cating that the appliance has reached an ade-
quate temperature.
•
-
ements are operating in order to maintain the
desired temperature.
DRY IRONING:
•
STEAM IRONING:
•
is selected.
STEAM FLOW CONTROL:
• -
SPRAY:
• The spray can be used in both steam and dry
ironing.
• Press the spray button ( A ) to use this oper-
ation.
• The spray button has to be pressed repeatedly
STEAM BLAST:
• This function provides extra steam for remov-
ing creases.
To Next Page
Loading...
