EasyManua.ls Logo

SOLAC Q605 - Battery Disposal and Safety; Battery Removal Procedure; Safe Battery Handling

SOLAC Q605
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
tive collection of Waste from Electric
and Electronic Equipment (WEEE).
- This symbol means that prod-
uct may include a battery or
batteries; user must to remove them
before disposing of the product. Re-
member that batteries must be dis-
posed of in duly authorised contain-
ers.
-
CAUTION: It is important that the
batteries are fully discharged prior
to its withdrawal from the appara-
tus.
To remove the batteries, once the
life of the appliance, proceed as
follows:
Open the top shell of the appara-
tus, removing previously with the
Identify the battery wires and cut
their (Red and Black). To avoid
risks of a short circuit with a pos-
the Red wire and protect it by using
insulating tape, then proceed to cut
the Black wire proceeding in the
same way.
Safely remove the battery from its
housing.
EN
This appliance complies with Direc-
tive 2014/35/EU on Low Voltage,
Directive 2014/30/EU on Electro-
magnetic Compatibility, Directive
2011/65/EU on the restrictions of
the use of certain hazardous sub-
stances in electrical and electronic
equipment and Directive 2009/125/
EC on the ecodesign requirements
for energy-related products.