Need help?Do you have a question about the SOLAC Q605 and is the answer not in the manual?
Appliance use by children aged 8+ and persons with reduced capabilities requires supervision.
This appliance is not a toy; children must be supervised to prevent playing with it.
Only use the appliance with the specific electric connector provided.
Connect only to safety extra low voltage matching the appliance marking.
Recharge only with supplied charger; use only specified batteries to avoid hazards.
Caution: A new battery is not fully charged and must be charged before first use.
NB: Do not use the appliance while it is connected to the charger.
Take to authorized service if damaged. Do not attempt self-repair as it may be dangerous.
CAUTION: Discharge batteries fully. Open top shell, cut wires (Red then Black) carefully.
To avoid short circuits, cut Red wire first, insulate, then cut Black wire and remove safely.
Appliance use by children aged 8+ and persons with reduced capabilities requires supervision.
This appliance is not a toy; children must be supervised to prevent playing with it.
Only use the appliance with the specific electric connector provided.
Connect only to safety extra low voltage matching the appliance marking.
Recharge only with supplied charger; use only specified batteries to avoid hazards.
Caution: A new battery is not fully charged and must be charged before first use.
NB: Do not use the appliance while it is connected to the charger.
Take to authorized service if damaged. Do not attempt self-repair as it may be dangerous.
CAUTION: Discharge batteries fully. Open top shell, cut wires (Red then Black) carefully.
To avoid short circuits, cut Red wire first, insulate, then cut Black wire and remove safely.
This document describes the Solac Q605 Clothes Shaver, a household appliance designed for removing lint and pills from garments. The device is intended for domestic use and is not suitable for professional or industrial applications. It is a battery-operated appliance, emphasizing portability and ease of use.
The Solac Q605 Clothes Shaver is specifically designed to refresh and restore the appearance of clothing by effectively removing lint, fuzz, and pills. It operates by gently shaving the surface of fabrics, collecting the removed material in a dedicated container. This process helps to prolong the life of garments and maintain their aesthetic quality. The device is equipped with rotating blades that work in conjunction with an outer foil to safely and efficiently trim away unwanted fabric imperfections without damaging the underlying material.
The clothes shaver is designed for straightforward operation. Before first use, it is crucial to ensure that all packaging materials are removed and the battery is fully charged, which typically takes 6 to 8 hours. The battery should be charged at an atmospheric temperature between 4 and 40°C using a 5V, 1-2A adapter (not included). A pilot light indicates when the charger is ready and when the battery is charging. The appliance cannot be used while connected to the charger.
To use the shaver, garments should be placed on a smooth surface. It is important not to use the appliance on clothes that are being worn to prevent injury to the user or damage to the garment. For optimal results, the instructions recommend moving the remover circle back and forth in small ranges on the clothes for fast removal of lint. For stubborn lint, the device should be moved perpendicularly and parallel to the clothes until the lint is removed. When dealing with thin texture clothes, it is advised to pile them into two layers and shave gently. For clothes with protrudes or applications, contact with these features should be avoided. If the clothes have patterns, moving the appliance in the direction of the pattern can yield better results.
The device features an on/off switch (F) for easy control. An information light (G) provides status indications. The battery is rechargeable via a USB charging cord (I) connected to a charge connection jack (H) located at the lower/back part of the appliance.
Regular cleaning and maintenance are essential to ensure the longevity and efficient operation of the Solac Q605 Clothes Shaver. After each use, the appliance should be stopped using the on/off button. The fluff container (K) needs to be removed and emptied.
The cleaning process involves disassembling specific parts of the appliance. First, the remover circle (A) should be taken off. Next, the outer foil (C) is removed by following the arrow direction. The rotative blades (D) are then taken out, and their shaft should be cleaned with the provided brush (J). The lint container (K) also needs to be cleaned. After cleaning, the blades and outer foil are reinstalled in reverse order, and the appliance is reassembled.
For general cleaning of the equipment, a damp cloth with a few drops of washing-up liquid can be used, followed by drying. It is crucial to avoid using solvents, or products with an acid or base pH such as bleach or abrasive products, as these can damage the appliance. The appliance should never be submerged in water or any other liquid, nor placed under running water, as this increases the risk of electric shock and damage.
Safety warnings emphasize that cleaning and user maintenance should not be performed by children unless they are supervised. The appliance should be stored out of reach of children and individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. It is important to keep the appliance in good condition, checking that moving parts are not misaligned or jammed and that there are no broken parts or anomalies that could prevent correct operation.
The battery must be removed from the appliance before it is scrapped and disposed of safely in duly authorized containers, not in fire. If the appliance falls, shows visible signs of damage, or leaks, it should not be used. Any contact with liquid released from the battery should be avoided, and medical advice sought if contact occurs, especially with eyes. The appliance should not be used or stored outdoors or exposed to moisture. Moving parts should not be touched while the appliance is operating.
In case of anomalies or damage, the appliance should be taken to an authorized technical support service. Users are advised not to attempt to disassemble or repair the appliance themselves due to potential dangers. The manual also provides instructions for safely removing the battery at the end of the appliance's life, which involves fully discharging the battery, opening the top shell, cutting the battery wires (red first, then black, insulating each), and then removing the battery from its housing.
General| Product color | Purple, White |
|---|---|
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Number of batteries supported | 1 |
To Next Page