ENGLISH EN
MAIN COMPONENTS
1. ON/OFF switch
2. Shaving closeness level selector
3. Cleaning brush
4. Lint chamber
5. Battery compartment (batteries not included)
6. Transformer
7. Transformer connector
USER INSTRUCTIONS
• If using the unit with the transformer, insert the
transformer jack (6) into the matching connector
(7).
• If using batteries to power the unit, open the bat-
tery compartment (5) by pressing the lid and slid-
ing it upwards.
• Insert 2 LR14 batteries with the poles as indicated
• Close the battery compartment by pressing on the
lid and sliding it downwards.
• Select the closeness level using the closeness
level selector (2).
• Turn the ON/OFF switch (1) to the ON position.
• Place the garment on a smooth surface. Without
pressing, gently glide the fabric shaver over the
Downloaded by: pd-oliana on 01-09-2022 11:41 CEST
To Next Page
Loading...
