•
the screen 12:00.
• Press ON/OFF button, the red (RUN) indicator
is ON.
•
seconds.
•
is being made. The antidrip system prevents
the edge of funnel
•
the machine
•
•
to Keep Warm and after 40 minutes, the coffee
TO MAKE PROGRAMMING COFFEE
• Set the clock and Schedule automatic startup
• First you have to set the clock.
•
the blue light turns on.
• Press the PROG button.
• CLOCK appears on the LCD screen. Press the
HOUR key and the MIN key to determine the
• Press the PROG button again.
•
clock automatically.
• TIMER appears in the LCD Screen, press
the HOUR key and the MIN key to set the
•
be set.
• Press the ON / OFF key once.
• The red light (RUN) is ON, it is in a state of
making coffee directly. Coffee starts coming
•
• With the blue light (AUTO) on, the coffee
machine enters automatic preparation status.
• If you press the ON / OFF key 3 times, the set
EN
• When the machine is making coffee, Press
• WARNING: Do not leave the coffee machine
ONCE THE APPLIANCE IS FINISHED,
• Stop the appliance.
• You can press ON/OFF to stop, or you can just
35 minutes.
• Unplug the appliance from the main.
• Clean the device.
CLEANING
• Disconnect the appliance from the mains and
task.
•
•
base pH such as bleach, or abrasive products,
for cleaning the appliance.
• If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
•
•
- Jug.
• Then dry all parts before its assembly and
storage.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
•
be kept free of limescale or magnesium
•
used on this kind of product.
To Next Page