Need help?Do you have a question about the Solahart Thermosiphon and is the answer not in the manual?
General terms and conditions of the Solahart warranty, including service network and manufacturer details.
Details what the warranty covers, owner responsibilities, and specific exclusions like misuse or improper installation.
Specific components covered, periods of coverage, and labor costs for different system types.
Conditions and requirements for making a warranty claim, including owner details and timely reporting.
Information on consumer guarantees and rights under Australian Consumer Law.
Essential safety advice regarding electrical hazards, high temperatures, and component tampering.
Information on the temperature pressure relief valve and expansion control valve, including maintenance.
Requirements for qualified installation, code compliance, and mains water pressure guidelines.
Explanation of how open circuit systems function and their limitations regarding freeze protection.
Explanation of closed circuit systems using Hartgard fluid for freeze and corrosion protection.
Intended use, high temperature warnings, and recommendations for scald prevention.
Advice on maintenance, backup redundancy, and Hartgard fluid for freeze protection.
Details on over-temperature systems, relief valves, and hydrogen gas warnings.
Explanation of temperature changes within the tank and the effect of boosting.
How in-tank electric boosting works and meets Legionella requirements.
Using timers for energy savings and optimal booster operation.
Turning the system on/off, and using it as a pre-heater for other systems.
Checklist for common hot water problems before requesting service.
Normal operation of relief valves and warranty for collector glass breakage.
Effects of changing water supply and how to select the correct anode.
Guidance on anode inspection, replacement, and saturation index effects on warranty.
Lists water chemistries that can void the Solahart warranty for various components.
Instructions for cleaning collector glass and performing minor maintenance every six months.
Details of the recommended comprehensive five-yearly service.
Standards, codes, Victorian installer notice, and application suitability.
Guidelines for choosing installation location and system application advice.
Advice on collector orientation, inclination, and frost protection.
Electrical connection standards, tank wiring, and thermostat settings.
Information on booster controls, timer switches, and wiring diagrams.
General plumbing requirements, TPR valve, and expansion control valve fitting.
Water pressure limits, relief valve drain lines, and valve location.
Advice on supplementary power, pipe insulation, packing, and decommissioning.
Function, components, and fitting instructions for the pipe shroud cover.
Steps for safely turning off the water heater.
Safety warnings regarding heavy components and hot collector surfaces.
Procedures for selecting tank location and fitting collector rails and straps.
Steps for joining collectors, fitting assemblies, and securing tank/collectors.
Mounting on different roof types and special advice for cold climates.
Procedures for filling and commissioning the storage tank before closed circuit filling.
Detailed steps for filling the closed circuit with Hartgard fluid.
Warnings about Hartgard contamination of rainwater tanks and end cap procedures.
Step-by-step guide for pressure testing and filling the closed circuit system.
Safety warnings regarding heavy components and hot collector surfaces.
Procedures for selecting tank location and fitting collector rails and straps.
Steps for joining collectors, fitting assemblies, and securing tank/collectors.
Instructions for removing and fitting the end cap for open circuit systems.
Installation and function of the TRV for over-temperature protection.
Connecting temperature limiting devices and commissioning the system.
Detailed technical specifications for various Solahart system models.
Details on tank materials, dimensions, insulation, and case construction.
Specifications for collector types, aperture, capacity, and materials used.
Technical details for the auxiliary electric booster unit.
European standards for wind and snow load testing applicable to collectors.
Annual performance calculations for Solahart J thermosiphon systems.
Annual performance calculations for Solahart L thermosiphon systems.
Specifications for 181J and 302J systems compliant with SANS 1307.
Important notes, warnings, and operating component details for SANS compliance.
Steps for safely shutting down the unit in an emergency.
Diagram showing component layout and connections for the 151J model.
Diagrams showing component layout for 181J, 181LCSC, 181BTC models.
Diagram showing component layout and connections for the 151L model.
Diagram showing component layout and connections for the 181L model.
Diagrams showing component layout for 302J, 302LCSC, 302BTC models.
Diagram showing component layout and connections for the 303J model.
Diagram showing component layout and connections for the 302L model.
Diagram showing component layout and connections for the 303L model.
Diagrams illustrating water connections for closed circuit systems.
Diagrams illustrating water connections for open circuit systems.
Instructions and diagrams for attaching collector and tank straps to rails and clamps.
Diagram illustrating pitched tiled roof mounting.
Comprehensive checklist for installation completion and handover to the householder.
Procedures for draining closed circuit fluid from collectors and heat exchanger.
Steps for draining and flushing the solar storage tank and collectors.
Instructions for refilling and turning on the water heater after servicing.
Detailed steps for replacing the anode in the solar storage tank.
Contact details for Solahart's international headquarters and registered office.
Service and sales telephone numbers for Solahart in Australia.
Telephone, facsimile, email, and web details for international sales.
General| Brand | Solahart |
|---|---|
| Model | Thermosiphon |
| Category | Water Heater |
| Language | English |
To Next Page
