Solar-Log Pro 380 - User Manual

Quick reference guide
Electronic three-phase energy meter
for DIN-railmount, with MID-confirmation
and ModBus-interface.
Please note
This document is only a quick reference guide and does not handle every function. The complete users guide is
available at: www.kdk-dornscheidt.de
Information for your safety
Installation and operation of the device described in this manual may only be performed by qualied personnel.
Only people that are authorized to install, connect and use this device, who have proper knowledge about labe-
ling and grounding electrical equipment and circuits and can do so in accordance with local (safety) regulations,
are considered qualied personnel in this manual.
Please Note
Installation and operation of the device described in this manual may only be performed by qualied personnel.
Only people that are authorized to install, connect and use this device, who have proper knowledge about labe-
ling and grounding electrical equipment and circuits and can do so in accordance with local (safety) regulations,
are considered qualied personnel in this manual.
Attention
Case is sealed, do not open the meter! No warranty if case is opened or seal is removed. Please
check that all cables are free from mechanical stress after assembly.
Dimensions (mm)
Width: 70,0 mm
Height with cover: 140,0 mm
Height without cover: 92,4 mm
Depth: 63,0 mm
 V1.1
Achtung: ZuVerrechnungszweckendürfennurZählermit
MID–Konformitätserklärungverwendetwerden.


BeispielfürdieMIDKennzeichnung:
BeiRückfragenzumSolarLog™,oderderKonguraondesZählersimSolarLog™
wendenSiesichbiean:
support@solarlog.com,oder:07428/9418660

BeiRückfragenzumZählerwendenSiesichbiean:info@kdkdornscheidt.com,
oder:02244/919940
 V1.1
Kurzanleitung:
InformaonzuIhrereigenenSicherheit:
DieseKurzanleitungenthältnichtallefürdenBetriebdesZählersgeltenden
Sicherheitsvorschrien.EskannaufGrundbesondererBetriebsbedingungen,örtlichenVorschrienoder
Verordnungennotwendigsein,weitereMaßnahmenzuergreifen.
QualiziertesPersonal:
DerZählerdarfnurvonqualiziertemFachpersonalinstalliertundangeschlossenwerden.Esgeltenjene
Personenalsqualiziert,diezugelassensind,Geräte,SystemeundStromkreiseentsprechendderSicher
heitsnormenundVerordnungeninBetrieb zusetzen,einzuschalten,zuerdenundzumarkieren.
Abmessungen(mm):

Breite:   70mm
Höhem.Abdeckung: 140mm
Höheo.Abdeckung: 92,4mm
Tiefe:   63mm
Achtung:
DasZählergehäuseistversiegelt,derZählerdarfnichtgeönetwerd en.
BeiÖnungdesZählersoderZerstörungder SiegelerlischtderGaraneanspruch.

BiebeachtenSie:
BeidiesemDokumenthandeltessichlediglichumeineKurzbeschreibung,in
dernichtaufalleFunkonenderGeräteeingegangenwerdenkann.
EineausführlicheBeschreibungstehtIhnenaufwww.kdkdor ns c heidt.dezur
Verfügung.
ElektronischerDrehstromzähler
fürDINSchienenmontage
mitMIDKonformitätserklärung
mitModBusSchnistelle

Summary

Quick Reference Guide Overview

Document Scope and User Guide Availability

This document is a quick reference guide; the complete user guide is available online.

Safety Information for Qualified Personnel

Installation and operation by qualified personnel with knowledge of local safety regulations.

Meter Case and Cable Handling Warning

Do not open the meter case; warranty void if opened. Ensure cables are free from stress.

Device Dimensions

Provides physical dimensions of the device in millimeters.

Technical Specifications and Connection Diagrams

Technical Specifications

Details electrical and operational parameters of the PRO380 meter.

Connection Diagram 1000 (DIN 43856)

Details the wiring connections for the DIN 43856 standard.

Connection Diagrams for Operating Modes

Explains connection assignments for consumption, sub-consumer, inverter, and production meters.

PRO380 RS485 and Display Information

RS485 Connection Assignments

Details bi-directional connection assignments for consumption and battery meters via RS485.

Terminal Block Connector Details

Illustrates terminal block connections for Solar-Log™ and PRO380 devices.

RS485 Bus Termination

Guidance on terminating the RS485 bus with a resistor for the last device.

Meter Display Value Navigation

How to navigate through meter display values using the keys.

Meter Configuration and Compliance

Modbus Address Configuration

Instructions for changing the Modbus address using meter keys and password.

Billing Measurement Note

Measurement for billing purposes is only valid for MID-confirmed meters.

Example of MID Labeling

Illustrates an example of MID labeling on the device.

Support and Contact Information

Provides contact details for Solar-Log™ and PRO meter inquiries.

Solar-Log Pro 380 Specifications

General

Communication Interfaces	Ethernet, RS485, USB
Display	LCD
Maximum DC Input Power	380 kW
Maximum DC Input Voltage	1000 V
Number of MPP Trackers	2
Data Logging	Yes
Operating Temperature Range	-20°C to +60°C
Data Storage	Internal memory
Protocols	Modbus
Max. PV plant power	380 kW