Solar Cloud-Box-M1 User Manual

Precautions of Cloud-Box-M1 usage:
1. About places of application: Complex electromagnetic
environment effects wireless signals transmission. Please
keep Cloud-Box-M1 device in a clean or low interference
circumstance.
2. About APP operation: when install “MyGreen SolarMonitor”
APP, please allow all requested permissions. Otherwise,the
APP may crash or not working properly.
In AP mode, Cloud-Box-M1(short for M1 bellow)works
as a Wi-Fi hotspot.Users can connect to the hotspot to
monitor the MPPT controller via APP. (In AP mode, M1
works with MyGreen SolarMonitor APP only. It does
not support web logging in.
How to connect M1 with APP in AP mode?
Step 1: Connect M1 device with
MPPT charge controller by cable,
and make sure the green power
indicator is on.
Step 2: Short press on “Reset”
button, it is AP mode if the blue
signal light flashes after 10s on.
If not, please have a short press
on “Exit/Default” button and switch to AP mode.)
Step 3: Download and install “MyGreen SolarMonitor” phone
APP, then go to
Setting>WLAN (WIFI)>Select “MyGreen-Solar-XXXX”>Input
password “88888888”> Connected.
Step4: Open “MyGreen SolarMonitor”
APP Home page, click “AP mode” on
the upper left corner. The APP will jump
to data interface of the connected
MPPT controller.
Reset
Exit
Default
Signal
Power
The application of AP mode:
The green light
indicates the
power is on.
The button is for
AP mode and STA
mode switching.
The blue light is
on for 10s then
flashes, it indic-
ates AP mode.
Tap the button to
confirm the device
works normally
after the power is
on. Combining
with blue light, it
helps judge curre-
nt working mode.
Friendly tips of AP mode:
1. In AP mode, device M1 works as a router.M1 will generate a
Wi-Fi hotspot. It supports 2-3 users connecting to the same
hotspot at the same time.
2. Wi-Fi hotspot covers 50 meters in open area. And it goes
through 1 layer of non-metallic shield wall indoor.
3. The Wi-Fi hotspot is for “MyGreen SolarMonitor” APP ONLY.
It does not support web service.
4.Parameter setting password:888888
Cloud-Box-M1 User Manual
App Store & Google play
Dear valued users,
Please scan the above QR codes to get “MyGreen Solar
Monitor” APP.
You can search “MyGreen” or “MyGreen SolarMonitor” in APP
Store and Google Play to get the APP, too.
If you have questions in using Cloud-Box-M1, please refer to
on-line video tutorial.
AP mode: https://youtu.be/Kv_QaK32xQM
STA mode: https://youtu.be/vFGvLDIT2oI

Solar Cloud-Box-M1 Specifications

General

Brand	Solar
Model	Cloud-Box-M1
Category	Wireless Router
Language	English