Solar Florida - Technical Specifications and Pictorial Guide; Battery and Burn Time; Usage and Safety Symbols; Material Suitability and Environmental Protection

404308BG
VB
l
abo
lG mro
f
x
u
L 1
1
02
t
hg
iry
p
o
C
©
LED
NIMh
2/3AAA-100MAH
SOFTTONE LED
F
L13
L15
M2
P8
M5
P11
C7
M18
C1
M19
C9
Technical specifi cations and guiding lines per model.
• Take notice of all technical specifi cations for your product at all times. See the pictorial signs on
the enclosed users guid
e.
•
Below is an explanation of the pictorial signs.
P8 This model contains (..x) NiMh batteries of the type AA (Penlight or Mignon).
P1
1 Under normal circumstances the light will burn for 6 hours after turning on power.
C7 Solar lighting is designed solely for outdoor use.
C1 Safe around children and animals
C9 No connection to the electrical circuit required.
L1
3 This light uses 1 or more LED’s as a light source. This combines a long life-time with low power
consumption. Solar LED’s are not interchangeable.
M2 The product is suitable for placement on/ connecting to regularly fl ammable material/ surfaces.
Built in p
roducts must under no circumstances be covered by isolation material, or any material of
th
at sort.
M5 IPX3 the product can be exposed to raindrops (falling in an angle of 60˚ to the vertical spindle).
M1
8 Please recycle packaging.
M1
9 Please dispose of batteries in the correct way.
L15
This model contains LED in warm “soft-tone” white.
2
1
3