Solar Florida User Manual

Florida
Follow the safety and assembly instructions carefully, and keep this manual in a safe place:
1.
Read this manual carefully. If in doubt, consult the store.
2.
Based on health and safety rules, you must not convert (CE), or make any changes to the solar lights
yourself. Should you ignore this the guarantee will be null and void.
3.
Do not expose the product to extreme heat, extreme pressure, or other inappropriate use.
Should
you ignore this again the guarantee will be null and void.
4.
This product is not a toy, and is not to be used as such by children.
Solar installation instructions:
A.
Move the switch to ON, or remove the plastic strip.
B. Then the batteries need to be fully charged. Place the light in suffi
C.
Assemble or place the solar lights without putting any pressure on the solar-panel or
protection-hood. Do not use a hammer! (schedule 1)
D. Because of the built-in light sensor, the light will switch on automatically when it turns dark.
Pla
ce the light carefully in a proper position, for good use of the solar-sensor.
E.
The lamp is provided with a solar-cell to charge the battery/batteries. For this it needs suffi
daylight. Position the lamp with care, so that the battery can fully charge during the day. (Schedule 2)
Less sunlight as a result of shadow (clouds, obstacles in general) or season (winter) will infl uence the
amou
nt of time that the light will burn at night.
F. Regularly clean the solar cells with water and mild detergent for a maximum storage of sunlight.

Solar Florida Specifications

General

Category	Landscape Lighting
Power Source	Solar
Light Color	Warm White
Battery Capacity	600mAh
Charging Time	6-8 hours
Weather Resistance	IP44
Material	Plastic
Installation	Stake-mounted

Summary

Safety and Assembly Instructions

General Safety Guidelines

Follow safety instructions, do not modify, avoid extreme conditions, and keep away from children.

Solar Installation Steps

Initial Setup and Charging

Activate the light, ensure batteries are fully charged, and place without pressure on the solar panel.

Optimal Placement and Performance

Position light for sensor activation at dark and sufficient daylight charging for battery.

Maintenance and Environmental Factors

Clean solar cells regularly and understand how shadows and seasons affect burn time.

Technical Specifications and Pictorial Guide

Battery and Burn Time

Model contains NiMh batteries; light burns for 6 hours under normal circumstances.

Usage and Safety Symbols

Explains symbols for outdoor use, child/animal safety, no electrical connection, and LED light source.

Material Suitability and Environmental Protection

Product is suitable for flammable surfaces but not isolation; withstands raindrops (IPX3).

Disposal and Recycling

Instructions for recycling packaging and proper disposal of batteries.