To Next PageTo Next Page
Need help?Do you have a question about the Solar PI5000X and is the answer not in the manual?
General| Model | PI5000X |
|---|---|
| Rated Power | 5000W |
| Peak Power | 10000W |
| AC Output Frequency | 50Hz / 60Hz |
| Frequency | 50Hz / 60Hz |
| Waveform | Pure Sine Wave |
| Cooling | Fan Cooling |
| DC Input Voltage | 48V DC |
| AC Output Voltage | 220V |
| Output Voltage | 220V |
| Efficiency | 90% |
| Protection Features | Overload, Short Circuit, Low Voltage, Over Voltage |
Hazards include hydrogen gas, static electricity, battery acid, and electrical shock from water.
Choose deep cycle batteries over standard starting batteries for inverter applications.
Calculate watt-hours and amp-hours required for applications, and add a buffer for safety.
Use properly rated, short, low-resistance cables and ensure tight connections for safety and performance.
Install a correctly rated fuse or circuit breaker on the positive DC input for protection.
Select a dry, well-ventilated location away from flammables, heat sources, and battery gases.
Connect positive and negative cables correctly, ensure tightness, and use fuses/breakers.
Ensure devices and inverter are OFF before connecting, turn on sequentially to avoid overloads.
Determine device peak and continuous power needs, ensuring compatibility with the inverter.
Disconnect power before replacing fuses, use correct amperage and type as per model.
