EasyManua.ls Logo

Solaris LOCOR - User Manual

Solaris LOCOR
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
8778002
Released January 8 2018
SOL
ARIS LOCOR® RECESSED MECHANICAL HARD WOUND ROLL TOWEL DISPENSER USER GUIDE (SKU NUMBERS D68012-A)
The L
oCor Recessed Mechanical Hard Wound Roll Towel Dispenser is designed to be mounted into the wall or inside a recessed cabinet on the wall to yield
maximum space in the busy bathroom environment. The dispenser provides hands-free and battery-free operation for paper dispensing and offers an elegant
stainless steel appearance.
The dispenser is designed for an opening of 10 5/8” Width x 15 1/8” Length x 4” Depth.
TABLE OF CONTENT
I. Dispenser Installation Instruction …………………………………………………………………………………………………………. Page 2
1. Install Directly into the WallUsing Cover Panel ………………………………..……….………….………… Page 2
2. Install into Existing Recessed Cabinets on the Wall - Using Filler Panels ……………..…….……….…. Page 4
2a. Use Insert Filler Panel ………………………………………………………….……………….……………. Page 5
2b. Use Hanging Filler Panel ……………………….……………………………………………………………. Page 5
II. Changing Mounting Side of Cover ………………………………………………………………………………………………………….. Page 7
III. Roll Support Installation ……………………………………………………………………………………………………………………… Page 8
1. For 7” Width Solaris LoCor Paper Towel SKU Numbers 46897, 46989, 46899, 46902 ………………. Page 8
2. For 8” Width Solaris LoCor Paper Towel SKU Numbers 46896, 46901 ………………………………….. Page 8
IV. Paper Loading and Start Up ………………………………………………………………………………………………………………… Page 9
V. Failure Diagnostics ………………………………………………………………………………………………………………………………… Page 9
1
Outer dimension is 18.17" x 14.67" x 10.97", weighs approximately 8.7 lbs.
Question and Answer IconNeed help?

Do you have a question about the Solaris LOCOR and is the answer not in the manual?

Summary

Dispenser Installation Instructions

Install Directly into the Wall - Use Cover Panel

Instructions for mounting the dispenser directly into a wall opening using the cover panel.

Install into Existing Recessed Cabinets - Use Filler Panels

Procedures for installing the dispenser into pre-existing recessed cabinets using filler panels.

Use Insert Filler Panel

Steps for installing an insert filler panel for recessed cabinet mounting.

Use Hanging Filler Panel

Instructions for using a hanging filler panel for recessed cabinet installation.

Changing Mounting Side of Cover

Roll Supports Installation

Paper Roll Loading and Start-Up

Diagnostics

Solaris LOCOR Specifications

General IconGeneral
BrandSolaris
ModelLOCOR
CategoryDispenser
LanguageEnglish