EasyManua.ls Logo

Solaris LOCOR User Manual

Solaris LOCOR
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
8778002
Released January 8 2018
SOL
ARIS LOCOR® RECESSED MECHANICAL HARD WOUND ROLL TOWEL DISPENSER USER GUIDE (SKU NUMBERS D68012-A)
The L
oCor Recessed Mechanical Hard Wound Roll Towel Dispenser is designed to be mounted into the wall or inside a recessed cabinet on the wall to yield
maximum space in the busy bathroom environment. The dispenser provides hands-free and battery-free operation for paper dispensing and offers an elegant
stainless steel appearance.
The dispenser is designed for an opening of 10 5/8” Width x 15 1/8” Length x 4” Depth.
TABLE OF CONTENT
I. Dispenser Installation Instruction …………………………………………………………………………………………………………. Page 2
1. Install Directly into the WallUsing Cover Panel ………………………………..……….………….………… Page 2
2. Install into Existing Recessed Cabinets on the Wall - Using Filler Panels ……………..…….……….…. Page 4
2a. Use Insert Filler Panel ………………………………………………………….……………….……………. Page 5
2b. Use Hanging Filler Panel ……………………….……………………………………………………………. Page 5
II. Changing Mounting Side of Cover ………………………………………………………………………………………………………….. Page 7
III. Roll Support Installation ……………………………………………………………………………………………………………………… Page 8
1. For 7” Width Solaris LoCor Paper Towel SKU Numbers 46897, 46989, 46899, 46902 ………………. Page 8
2. For 8” Width Solaris LoCor Paper Towel SKU Numbers 46896, 46901 ………………………………….. Page 8
IV. Paper Loading and Start Up ………………………………………………………………………………………………………………… Page 9
V. Failure Diagnostics ………………………………………………………………………………………………………………………………… Page 9
1
Outer dimension is 18.17" x 14.67" x 10.97", weighs approximately 8.7 lbs.
Question and Answer IconNeed help?

Do you have a question about the Solaris LOCOR and is the answer not in the manual?

Solaris LOCOR Specifications

General IconGeneral
BrandSolaris
ModelLOCOR
CategoryDispenser
LanguageEnglish

Summary

Dispenser Installation Instructions

Install Directly into the Wall - Use Cover Panel

Instructions for mounting the dispenser directly into a wall opening using the cover panel.

Install into Existing Recessed Cabinets - Use Filler Panels

Procedures for installing the dispenser into pre-existing recessed cabinets using filler panels.

Use Insert Filler Panel

Steps for installing an insert filler panel for recessed cabinet mounting.

Use Hanging Filler Panel

Instructions for using a hanging filler panel for recessed cabinet installation.

Changing Mounting Side of Cover

Roll Supports Installation

Paper Roll Loading and Start-Up

Diagnostics