Solartron Analytical 1260A

Need help?

Do you have a question about the Solartron Analytical 1260A and is the answer not in the manual?

Summary

Introduction

1.3 Specification

Detailed technical specifications of the 1260 Impedance/Gain-Phase Analyzer.

Installation

2.2 Safety

Crucial safety precautions for operating and maintaining the instrument.

2.4 Power Supply

Getting Started

3.6 Making a Simple Measurement

Practical example demonstrating how to perform a basic impedance measurement.

3.7 Using the Sweep Facility

Menu Terms

5.1 GENERATOR

Detailed explanation of the generator's parameters and settings.

5.2 ANALYZER

Explanation of the analyzer's input configurations and measurement parameters.

5.3 SWEEP

5.8 DATA OUTPUT

5.9 SCALE;LIMITS

5.14 LEARN PROGRAM

Facilities for creating, editing, and executing learnt programs.

5.15 SELF TEST

Procedures for running instrument self-tests and troubleshooting.

Measurement Connections

6.2 Analyzer Input Configurations

6.5 Basic Connections for In-circuit Impedance Measurements

Standard connections for performing in-circuit impedance measurements.

Remote Control: GPIB & RS423

7.2 GPIB Interface

Details on the GPIB interface, connectors, and capability codes.

7.3 Serial Interface

Remote Commands

8.3 Command Summary

A comprehensive list of available remote commands and their parameters.

Messages and Error Codes

9.2 Command Summary

Detailed summary of instrument messages and error codes, categorized by group.

Measurement Scaling and Limit Checking

10.3 Scaling a Measurement

10.4 The Limits Facility

How to set and use limits for pass/fail checking of measurement results.

Learnt Programs

11.1 Learnt Program Facilities

11.4 Creating a Learnt Program

11.6 Editing a Learnt Program