Solebe Smartlock Y801

Questions and Answers

B
Brad RobinsonAug 7, 2025
Why won't my Solebe Smartlock Y801 pair?
- M
  michelle63Aug 7, 2025
  If you're having trouble pairing your Solebe Bicycle Accessories, here are a few things to try: 1. Ensure the device is in unlocked status, then press the lock button until you hear 2 'Di Di' sounds before searching and pairing. 2. Verify that your phone's Bluetooth is turned on. 3. Confirm that your phone’s GPS is enabled. 4. Make sure the lock isn't already paired with another phone by turning off Bluetooth on other phones.
S
Sherry LeeAug 15, 2025
How to fix Solebe Smartlock Y801 that are unable to lock?
- K
  Kenneth WhiteAug 15, 2025
  If you're unable to lock your Solebe Bicycle Accessories, consider the following: * The battery might be too low. Charge it and try again. * The program may be stuck. If so, click the reset button.
R
Robin LongAug 21, 2025
What to do if I get a password error on my Solebe Bicycle Accessories?
- D
  daniellestewartAug 21, 2025
  Encountering a password error with your Solebe Bicycle Accessories? Here's what you can do: * Ensure you're typing the correct code. * If there's a system recognition error, turn Bluetooth off and then on, and re-enter the password. * Verify you're using the correct password. * If nearby Bluetooth signals are interfering, move to a new location and try pairing again.
M
Michelle StephensAug 29, 2025
Why is the alarm failing on my Solebe Bicycle Accessories?
- B
  Bradley LeeAug 29, 2025
  Having trouble with the alarm on your Solebe Bicycle Accessories? Consider these points: * Make sure you've turned on the APP vibration alarm. * If there's no alarm when Bluetooth is paired, turn off Bluetooth and test the alarm. * Note that the alarm may be postponed to avoid accidental triggering. The alarm goes off one time after the first touch, and if the lock senses vibration 5 seconds later, the alarm will be triggered at once.