Solid GPS
Instructions
Getting started:
1. Open the packaging and take out the Solid GPS tracker.
2. Use the SIM card opener to flick the small white switch AWAY from the charging port.
3. Place Solid GPS near a window and wait 3 minutes for it to get a signal on your dashboard.
4. Place Solid GPS in your asset, ensure Solid GPS is not fully covered by metal.
5. Download the Solid GPS app on IOS/Android or bookmark it on your computer.
Customising Your Account in the “account” tab:
1. Your tracker’s name can be changed under “Name”
2. Your tracker’s colour can be changed under “Colour”
3. Get an overview of your tracker by generating a custom report which displays all data points
between two specific dates, identifies address types and much more.
Setting Boundaries:
1. In your account settings Select “Boundary”
2. Click on the grey square at the top of the map and draw your boundary.
3. Move the boundary by clicking the hand at the top of the map.
4. Delete the boundary by clicking on the bin icon.
5. Name your boundary in the textbox below the map
6. Select which type of alerts you’d like to receive and press “Submit”.
Charging Your Tracker:
1. You will receive an email or app alert whenever your device needs to be charged
2. Use the included Micro USB cord to charge the device.
3. Your device should take around 6 hours to charge fully.
4. The red/orange LED should turn off once the tracker is fully charged.
If Your Vehicle gets stolen:
1. On the dashboard press the “Emergency Mode” button. The tracker will transmit every minute
while moving once it transmits its next GPS point.
2. Go into your account settings. Locate and press the account sharing button.
3. Share the link with anyone, they will have access to your Dashboard for 24 hours.
Thank you for purchasing a Solid GPS Tracker. If you have any questions, issues or feedback contact
our support team at support@solidgps.com. Visit solidgps.com/support for updated instructions.
Solid GPS has been shipped with its battery half charged to comply with shipping standards.
We’ll email you before your subscription starts, please write down any suggestions you have.
Emergency Mode: Turning on this mode decreases the amount of time between GPS points to
around a minute.
WatchDog Mode: Turning on this mode creates a 75m boundary around your last GPS point. If your
GPS tracker activates twice or leaves that boundary, Emergency mode activates and you’re notified
via email and phone.
To Next Page
Need help?
General