ST-RoIP4-Kirisun User’s Guide
Copyright © Innotek Company Limited. All Right Reserved.
4
4. I/O Terminal
This terminal is used to connect to a radio unit.
5. Mode Selection Switch
DIP SW1
:
Radio Unit PTT Control Mode Selection. OFF for PTT Mode 1. ON for PTT Mode 2.
DIP SW2
:
Digital Interoperability Stabilizer Selection. OFF for 1 Second. ON for 3 Seconds.
6. Ethernet Terminal
This terminal is used to connect to 10/100-Base-T IP network.
7. DC5V Terminal
This terminal is used to connect to AC Adapter.
To Next Page