Solight TE81 User Manual

EN WEATHER STATION Solight TE81
User's Manual
User's Manual Dear customer, thank you for purchasing our product. If you want to safely make full use of the features, please carefully read these instructions
and follow them. This way, you will avoid incorrect use or damage. Prevent unauthorized use of this device and always respect all rules regarding the handling of
electrical devices. Please, keep the manual for future use. The main unit should be as close to a window as possible.
TECHNICAL SPECIFICATIONS
We recommend using alkaline batteries with a nominal voltage of 1.5 V to
achieve the correct luminosity of the LCD display. NiMh accumulators
usually have a voltage of 1.2 V causing the LCD luminosity to be inferior.
Main Unit
If the unit is to be powered by batteries open the battery compartment cover and insert two alkaline AA batteries (not included). Mind the indicated polarity.
When powering up, for a moment, all of the LCD segments light up and the device makes a beep sound. It then goes into the standard temperature and
humidity measurement mode.
When the device is powered by an AC/DC adapter connect the power connector to the input socket on the weather station and then connect the adapter to a
power socket.
To reset the device, remove and reinsert the batteries or disconnect the adapter for at least five seconds. This will delete all settings and memory. When
powered by batteries, the display stays lit for eight seconds after each activation. When powered by the adapter, it stays lit continuously.
The main unit can be paired with up to three sensors. Each sensor is powered by two alkaline AA batteries (not included).
Default Settings: 24-hour time format showing 00:00, pressure in mb/hPa and temperature in °C.
1. BUTTON FUNCTIONS
2. MAIN FUNCTIONS
 6 graphic levels of weather forecast: sunny, scattered clouds, cloudy, rainy, heavy rain, snow
 RCC Signal Reception Mode: DCF
 Calendar Span: 2000-2099, displaying date and day of the week
 Time format 12/24 hours
Room Temperature Measurement
0°C to +50°
Room Humidity Measurement
20% to 95%
Outside Temperature Measurement
-20°C to +60°C
Outside Humidity Measurement
20% to 95%
Power supply
2x AA 1.5V alkaline battery
AC/DC adapter 5V/1200mA
Temperature Measurement Accuracy
1°C
Humidity Measurement Accuracy
5%
Atmospheric Pressure Measurement Range
600 hPa/mb – 1,100h Pa/mb
Controls
Functions
MEM
on/off
/ Z
Z
Standard
mode
Brief
push
Display
date / sec
Display
alarm time
/ date
Toggle between
°C/°F
Toggle individual
sensors / cyclical
sensor display
mode
Turns the
temperatu
re alarm
on/off
Change the
backlight
intensity
Display
stored max.
and min.
temperature
s and
humidity
Turn
alarm
on/off
Turn on
display
backlight /
snooze
HOLD
Access
time
setting
mode
Access
alarm
clock
setting
mode
RCC reception
mode activation
Sensor signal
reception
activation
Access
temperatu
re alarm
setting
mode
Enter pressure:
unit change
mode/forecast
change mode
Delete data
about max.
and min.
temperature
s and
humidity
-----
-----
Setting
Time
Brief
push
Confirm
setting
-----
One step forward
One step back
-----
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----
Setting the
Alarm Clock
Brief
push
-----
-----
One step forward
One step back
-----
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----
Setting the
temperatur
e alarm
Brief
push
-----
-----
One step forward
One step back
Toggling
the max.
and min.
temperatu
re settings
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----

Solight TE81 Specifications

General

Brand	Solight
Model	TE81
Category	Weather Station
Type	Wireless
Indoor temperature	Yes
Outdoor temperature	Yes
Indoor humidity	Yes
Outdoor humidity	Yes
Barometric pressure	Yes
Wind speed	No
Wind direction	No
Rainfall	No
Time	Yes
Date	Yes
Alarm clock	Yes
Moon phase	Yes
Weather forecast	Yes
Temperature unit	°C/°F
Humidity range	20% to 95%
Transmission frequency	433 MHz
Display	LCD
Power Source	Battery
Temperature range outdoor	-20°C to +60°C
Power supply main unit	2 x AA batteries (not included)
Power supply sensor	2 x AAA (not included)
Temperature range indoor	0°C to 50°C (32°F to 122°F)

Summary

Technical Specifications

Main Unit Power and Reset

Instructions for powering the main unit with batteries or adapter and how to reset.

Default Settings

Details the default configuration for time, pressure, and temperature units.

Button Functions

Display and Data Functions

Functions for displaying time, date, alarm status, and stored max/min values.

Mode and Setting Functions

Accessing and setting time, alarm, temperature alarm, and pressure units.

Display and Alarm Control

Controlling display backlight, snooze function, and managing temperature alarms.

Sensor Management

Toggling between sensors and enabling cyclical display of sensor data.

Main Functions

Weather Forecast and Trends

Overview of weather forecast graphics and temperature/humidity development trends.

RCC Signal Reception

Details on automatic and manual reception of the RCC control signal.

Device Features and Operation

Setting Time and Date

Procedure for setting the device's time, date, and day of the week.

Setting the Alarm Clock

Instructions for setting the alarm time and its snooze function.

Alarm Activation and Control

How alarms are activated, postponed, turned off, and their sound progression.

Sensor Toggle and Pairing

Switching between outdoor sensors and initiating the sensor pairing process.

Temperature Alarm Settings

Configuring high and low temperature alarms and their activation.

RCC Control Signal Reception

Details on automatic and manual reception of the RCC control signal.

Advanced Features and Settings

Weather Forecast Function

Explanation of the 12-hour weather forecast based on atmospheric pressure.

Lighting Up the Display

How to activate the display backlight and its behavior on battery vs. adapter power.

Moon Phases Display

Information on how moon phases are displayed based on date settings.

Perceived Comfort Function

Determining interior environment perception based on temperature, pressure, and humidity.