SOLIS 569 - First Use

73
s FIRST USE
I. SEALING A BAG FROM
VACUUM FILM
1. Insert the plug into a suitable socket.
2. Cut a suitable bag length from the film.
Fig. 1
3. Place the open bag end on the contact pressure rub-
ber
¥
of the open appliance. The bag end should
not extend into the vacuum chamber
µ.
Fig. 2
4. Close the lid of the appliance and press down at
both sides simultaniously until you hear a „click“ at
both sides. The cover is now locked by the locking
catches.
Fig. 3
5. Press the „SEAL“ button
➍
in order to seal the end
of the bag. The blue indicator light lights up and
goes out again when the sealing process is finished.
Fig. 4
6. Press both release buttons
≤
, once the blue indica-
tor light has gone out, the cover opens and you can
take out the bag. Now the end of the bag is sealed
and you can fill it.
Fig. 5
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5