73
s
BEFORE PLACING IN OPERATION
• Carefully remove the appliance from the packaging and remove all stickers
(except the type plate), labels, information sheets and packaging materials.
• Pull out of the appliance the ground coffee container with its lid.
• Turn the bean container clockwise to the stop (such that the two marks on the
bean container and on the appliance housing are opposite each other) and lift
off the bean container with its lid.
• Clean the bean container and the ground coffee container and their lids in warm
washing up water and rinse off everything carefully with clean water. Dry the
parts.
• Wipe clean the appliance housing using a soft, slightly damp cloth and dry it.
• Completely uncoil the mains cable and place it through the mains cable opening
on the base of the appliance.
• Push the dry ground coffee container with lid fitted into the appliance to the
stop under the ground coffee outlet. The “Max“ mark should point to the front
so that it is visible.
• Place the appliance on a dry, flat, stable work surface and insert the mains plug
in a suitable socket.
• Attention: The housing for the coffee grinder, the mains cable and the mains
plug must never be immersed in water or other liquids, or come into contact
with them!
• Note: The parts of the coffee grinder and the accessories are not suitable for
dishwashers.
GB
To Next Page
Loading...
Need help?
General
