To Next Page

To Previous Page

s

PLACING IN OPERATION

• The bean container has been ﬁtted, the grind set and the coffee beans have

been added. The ground coffee container with its lid has been pushed into the

appliance.

STEP: SETTING QUANTITY OF GROUND COFFEE USING

THE TIMER CONTROL

• Select the quantity of ground coffee required by turning the Timer control. The

longer the time or the higher the number, the longer the appliance will grind and

the greater the quantity of ground coffee. The shorter the time or the lower the

number is, the less time the appliance will grind and the smaller the quantity of

ground coffee. The maximum time that can be set is 60 seconds (setting 10).

• Note: Make sure you turn the Timer

control only to position 10 as a max-

imum. There you will notice a stop

that must not be passed by apply-

ing force; this action would damage

the timer. The costs that would be

incurred for a repair are not covered

by the guarantee.

• Attention: Please ensure the ground coffee container is never overﬁlled.

Depending on the grind set, this may occur already if the Timer control is set to

setting 5. With a full ground coffee container, the build-up of ground coffee

will cause the grinder to clog and the motor to overheat. If the Max mark on the

ground coffee container is reached, immediately press the Start/Stop button and

empty the ground coffee container before you start the grinding process again.

STEP: GRINDING COFFEE BEANS

• Press the Start/Stop button and the grinding process starts. After the time set

has elapsed, the appliance shuts down automatically.

• To interrupt the grinding process manually, you can press the Start/Stop button

at any time.

• Attention: Never overﬁll the ground coffee container! As soon as the Max mark

is reached, press the Start/Stop button and empty the container. On this issue,

see the explanations at the end of step 1.

STEP: REMOVING GROUND COFFEE

• Carefully pull the ground coffee container out of the appliance. The lid and the

built-in ion generator prevent ground coffee from escaping. Carefully remove

the lid and transfer the ground coffee to another container.

SOLIS SCALA ZERO STATIC User Manual

Other manuals for SOLIS SCALA ZERO STATIC