s
TROUBLESHOOTING
Problem Possible cause What to do
Unable to lock bean
container into posi
-
tion
– Coffee beans obstruc
-
ting bean container
locking device.
–
Bean container cannot
be pressed down.
– First remove the beans and
then the bean container.
Clear coffee beans from top
of conical burr. Re-install
and try again to re-lock
bean hopper into position.
–
If it is not possible to press
the bean container down
to the stop, check whether
both lobes in the outermost
ring on bean container
are in the mounting in the
middle of the slots. Only
then is it possible to fit and
lock the bean container.
Not enough / too
much coffee grind
– Grind amount requires
adjustment.
– Turn the Timer control
to correct the quantity of
ground coffee: shorter time
is less, longer time is more.
Emergency stop
necessary?
– Press the Start/Stop button
to stop the grinding pro-
cess.
– Unplug from the mains.
81
GB
To Next Page
Loading...
Need help?
General
