SOLIS SCALA ZERO STATIC User Manual

2120
7. Reassemble the appliance.
• Put the container lids 1 6 back on the ground coee container 7 and the
bean container 2
• Place the bean container 2 on the appliance. Rotate until the two marks align (image B).
• Place the ground coee container 7 under the ground coee outlet.
V INSTALLATION
1. Place the appliance on a stable, at, and heat and moisture resistant surface.
2. Plug the power cable 9 into a power outlet.
3. Press the Start/Stop button 5 to start the appliance.
V GRINDING COFFEE BEANS
1. Rotate the grind selector 4 to the desired setting.
4
The arrow on the bean container indicates the selected grind setting.
4
The higher the number on the grind selector, the coarser the grind (1 = ne, and 24 = coarse).
4
For espresso you need a ne grind (low number), for lter coee you need a medium grind and for
French Press coee you need a course grind (high number).
4
Only adjust the grind setting while the appliance is grinding. After adjustment, the appliance takes
a few seconds before grinding on the selected level. The rst small amount of ground coee will still
be ground according to the previous setting.
2. Fill the bean container 2 with coee beans.
3. Close the lid 1.
4. Set the timer 8 to the desired grinding time.
4
The grinding time determines the quantity of ground coee.
4
The maximum grinding time is 60 seconds (setting 10).
5. Press the Start/Stop button 5 to start the grinding process. The appliance automatically stops
when the grinding process is done.
4
The appliance automatically stops when the grinding process is done. You can stop the grinding
process at any time when you press the Start/Stop button.
6. Pull out the ground coee container 7.
7. Remove the lid 6 from the ground coee container 7.
8. Put the ground coee in a container of choice.
V DAILY MAINTENANCE
We recommend cleaning the appliance once a week. To clean the appliance:
1. Unplug the appliance.
2. Let the appliance cool down.
3. Remove the lid 1 from the bean container 2 and pour out the remaining beans.
4. Unlock the bean container 2 and remove it from the appliance (see chapter Before rst use).
5. Wash the following parts with mild soap and rinse thoroughly:
• Bean container 2
• Bean container lid 1
• Ground coee container 7
• Ground coee container lid 6
6. Clean the appliance with a damp cloth.
7. Dry all parts with a soft cloth.
• Do not use the appliance more than 4 times in a row to prevent from
overheating.
• Do not use oils or lubricants in the appliance.
Safety instructions regarding maintenance
6 WARNING
• Unplug the appliance before service and when replacing parts.
• Let the appliance cool down before cleaning.
• Never immerse the appliance in water or in other liquids, or place it in a
dishwasher.
• Do not use abrasive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the appliance. This can damage the appliance.
V CONTENTS
Please check the contents of the package:
1x SCALA ZERO STATIC
1x Bean container
1x Ground coee container
1x Cleaning brush
V APPLIANCE DESCRIPTION (SEE IMAGE A)
1 Bean container lid
2 Bean container
3 Conical burrs
4 Grind selector
5 Start/stop button
6 Ground coee container lid
7 Ground coee container
8 Timer
9 Power cable
q Non-slip rubber feet
V BEFORE FIRST USE
1. Remove and discard all packaging materials and hang tags.
2. Remove all detachable parts:
3. Rotate the bean container 2 counter clockwise so the two marks align (image B).
• Remove the bean container 2 from the appliance.
• Remove the ground coee container 7 from the appliance.
• Remove the container lids 1 6 from the containers 27
4. Rinse the following parts with hot water:
• Bean container 2
• Ground coee container 7
5. Let all detachable parts dry.
6. Clean the appliance with a damp cloth.

SOLIS SCALA ZERO STATIC Specifications

General

Brand	SOLIS
Model	SCALA ZERO STATIC
Category	Coffee Grinder
Language	English