Storage
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store
may vary. The bottle capacity is based on standard Bordeaux bottles.
Door Lock
Your unit is provided with a lock and key. The keys are located inside the plastic bag that contain the Instruction
Manual. Insert the key into the lock and turn it counter clockwise to unlock the door. To lock the door, do the
reverse of the prior action, making sure the metal pin is engaged completely. Remove the key and place it in a
secure place for safekeeping.
Shelves
The racks of some of our wine and beverage cooler models are equipped with a telescopic runner assembly
(except for the bottom shelves, the BIWC-120-2D, and the BIWC-60A). This allows you can move the wooden
shelves in and out smoothly with little resistance, maximizing usage efficiency and the overall lifespan of your
product.
To prevent damaging the door gasket, please make sure to have the door(s) all the way open when pulling each
of the shelves out of the rail compartment. For easy access to the bottles, you must pull the shelves approximately
1/3 out of the rail compartment.
To remove the shelves out of the rail, pull each shelf approximately 1/3 out. Use a long flat screwdriver to press
down the right plastic notch as shown in Figure A and at the same time lift the left plastic notch as shown in Figure
B. Then proceed to pull out the shelf slowly.
To Next Page
Loading...