Sollevare BIWC-100A - Page 19

18
Energy saving tip
Your wine / beverage cooler should be in the coolest area of the room, away from heat producing appliances and
out of any direct sunlight.
Charcoal filtration system
You could say that your wine is alive and breathes through the cork of its bottle. In order to consistently maintain
the wine’s quality, purity, and taste the corks must be stored at an ideal temperature with ambient conditions.
This allows the cork to maintain a maximum lifespan and preserve the finest of beverages inside.
To help accomplish this your cellar is equipped with an active charcoal filtration system to ensure air purity and
cooling efficiency. An odor & moisture free cabinet will offer optimal storage conditions for the best possible
future corkage. The filter assembly is located at the rear panel inside your cellar.
Keep in mind, this filter must be changed every 12 months.
1
Remove the bottles of wine stored on the shelves in
front of the filter.
Turn Left to remove filter.
2
Remove the shelves and set aside to be replaced
once you have changed the filter
3
Hold the filter and turn it at 45 degrees in the counter
clockwise direction and then pull it out.
4
Remove the existing filter and replace with a new
one.
5
Put the new filter into the hole and then turn the filter
at 45 degrees in clockwise direction.