EasyManuals Logo

Solo 462 Operator's Manual & Spare Parts List

Solo 462
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operators Manual & Spare Parts List
Model 462
WARNING: READ INSTRUCTIONS CAREFULLY BEFORE USING THIS UNIT.
CAUTION:
· Do not leave a pressurized sprayer in direct sunlight or near heat source. Heat can cause build up
of excessive pressure.
· Do not store or leave solution in tank after use.
· Always wear goggles, long sleeve shirt, long pants and full foot protection when spraying.
· Never use any tool to remove pump while sprayer is pressurized. Never stand with face or body
over top of tank when pumping or loosening pump, to prevent ejected pump assembly and/or
solution from striking and injuring you. Never pressurize sprayer by any means other than the
original pump.
· Do not attempt to modify or repair this product except with original manufacturer's parts.
· NEVER SPRAY FLAMMABLE MATERIALS. ALWAYS READ CHEMICAL LABEL BEFORE
FILLING SPRAYER AS SOME CHEMICALS MAY BE HAZARDOUS WHEN USED WITH THIS
SPRAYER.
· PRE-USE CHECK:
Inspect hose for deterioration, cracks, softness, or brittleness. If any of these
conditions are found, replace hose before using. Replace with original manufacturer's parts only.
Remove pump (see filling, pressurizing and spraying instructions). Inspect interior and exterior of
tank for signs of deterioration (i.e. rust, bubbling and/or pitting) of body and bottom. Any sign of
deterioration indicates possible tank weakening and could result in explosive bursting under
pressure. If any of these signs are found, discard tank immediately and replace. Do not attempt
to patch leaks, etc., as this could result in serious injury. Follow filling, pressurizing and spraying
instructions EXCEPT: USE WATER ONLY. Pump plunger only 8-10 strokes and inspect for leaks.
Direct shut-off valve away from you and open to make sure discharge is not clogged. If unit
passes this test, release pressure (see pressure releasing instructions), empty tank, and proceed
with filling, pressurizing and spraying instructions.
Customer Service Commitment From Solo’s Service Department
In the event the sprayer you have purchased has missing or damaged parts, please call 1-800-765-6462, 9:00 AM - 5:00 PM EST.
In order to assist your representative, please have the following information available: sprayer model number, description and part
number. A parts list is included in your operators manual.
Solo is committed to your satisfaction and continuing its efforts to earn your future business.
Visit us on the web at www.solousa.com
Parts ordering available on-line, or call Solo’s order desk at (757) 245-5531

Other manuals for Solo 462

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Solo 462 and is the answer not in the manual?

Solo 462 Specifications

General IconGeneral
BrandSolo
Model462
CategoryPaint Sprayer
LanguageEnglish

Related product manuals