To Next PageTo Next Page
Need help?Do you have a question about the Solo 662 and is the answer not in the manual?
Cleaning instructions for the pre-filter element.
Procedure for adjusting the oil pump's delivery rate.
Step-by-step guide for attaching the guide bar and saw chain.
Instructions on the correct fuel-oil mixture ratios and storage.
Guidance for the initial operation period of the chain saw.
Procedure for filling the oil reservoir for chain lubrication.
General instructions for starting the chain saw.
Specific procedure for starting a cold engine.
Specific procedure for starting a warm engine.
Explanation of the chain brake system and its operation.
Essential safety advice for operating the chain saw.
Recommended protective equipment for safe operation.
Understanding and preventing dangerous kick-back.
Factors to consider when assessing a tree before felling.
Method for removing buttress roots before felling.
How to cut the felling notch to guide the tree's fall.
Steps for safely felling a tree after making the notch.
Safety precautions to take when bucking timber.
Preparing the work site for bucking operations.
Guidelines for safely transporting the chain saw.
Information on saw chain wear and performance.
Importance of correct chain tension for service life.
Detailed instructions for sharpening the saw chain.
Chart detailing file specifications for chain sharpening.
How to adjust the depth gauge for optimal cutting.
Procedures for cleaning the chain saw after use.
Checking and maintaining the chain brake system.
Steps for cleaning or replacing the air filter.
Instructions for adjusting the carburetor for optimal performance.
Checking and replacing anti-vibration elements.
Importance of checking muffler condition and bolts.
Procedure for replacing the spark plug.
Guidelines for storing the chain saw properly.
Recommendations for professional service and repairs.
Importance of using original SOLO replacement parts.
Information on warranty coverage and exclusions.
Troubleshooting steps for when the engine fails to start.
Troubleshooting steps for when the chain does not rotate.
Troubleshooting steps for chain rotation at idle.
Troubleshooting steps for excessive smoke from the exhaust.
Troubleshooting steps for poor chain cutting performance.
Troubleshooting steps for lack of chain lubrication.
Scheduled maintenance checks for the entire chain saw.
Scheduled maintenance checks for the guide bar.
Scheduled maintenance checks for the saw chain.
Scheduled maintenance checks for the chain brake.
Scheduled checks for chain lubrication.
Scheduled checks for sprocket and clutch.
Scheduled checks for clutch drum lubrication.
Scheduled cleaning or replacement of the air filter.
Scheduled cleaning of air intake vents.
Scheduled cleaning of cylinder cooling fins.
Scheduled carburetor adjustments and checks.
Scheduled checks and replacement of the spark plug.
Scheduled maintenance for the fuel tank.
Scheduled checks for the oil reservoir and pick-up.
Scheduled checks for engine block retention screws.
Scheduled checks for muffler bolts.
Scheduled checks for accessible nuts and bolts.
General
