Need help?Do you have a question about the Solo 675 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 3.6 kW (4.9 hp) |
| Weight | 6.6 kg (without bar and chain) |
| Engine displacement | 70.6 cm³ |
| Bar Length | 45 cm |
Explains symbols and text formatting used in the manual for clarity.
States copyright protection and prohibits unauthorized use of manual content.
Details intended use, general safety rules, and precautions for safe operation.
Recommends specific protective clothing and gear for user safety.
Covers critical safety measures for refueling and transporting the chainsaw.
Outlines safety for assembly, maintenance, and essential pre-operation checks.
Provides crucial safety guidelines for using the chainsaw effectively and safely.
Lists standard components and identifies key controls and functional parts of the chainsaw.
Explains symbols on equipment, type plate, and components found under the cowl.
Details operation of throttle control, chain lubrication adjustment, and grip heating.
Explains the starter handle, cable, and decompression valve for engine start-up.
Describes the chain brake's automatic and manual operation and testing.
Lists detailed technical specifications for various SOLO chainsaw models.
Step-by-step guide for attaching the guide bar and saw chain to the chainsaw.
Instructions on correctly adjusting and checking the saw chain tension.
Guidance on fuel mixing, refueling, and filling the chain lubrication oil tank.
Describes correct starting positions and initial settings for engine start-up.
Troubleshooting steps for when the engine fails to start.
Explains how to safely switch off the engine, including during malfunctions.
Explains the causes and dangers of chainsaw kickback.
Details specific kickback scenarios and general prevention techniques.
Provides checklists for before, during, and after chainsaw use for safety.
Guides on safely cutting to length and handling branches under tension.
Instructions for branch removal and essential preparation for tree felling.
Details the critical steps for making the felling notch and the main felling cut.
Explains how to maintain the saw chain, guide bar, and sprocket.
Provides detailed instructions for sharpening the saw chain and depth limiters.
Covers replacing the sprocket, lubricating the bearing, and guide bar maintenance.
Guides on adjusting carburettor settings and troubleshooting idle speed.
Details the cleaning and replacement procedures for the air filter.
Covers spark plug checks and fuel filter replacement recommendations.
Provides a table outlining maintenance tasks and their recommended intervals.
Offers self-help tips for common issues and procedures for shutdown and storage.
To Next Page
