- ENGLISH - Mistblower Port 423
ENGLISH 1
Instruction manual
Original instructions
Caution! Prior to operating the unit, please
read the owner’s manual carefully, and most
importantly, observe all safety rules.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
EC declaration of conformity Î The EC
declaration of conformity on a separate piece of
paper forms part of these operating instructions.
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then
they must be disposed of properly in accordance
with applicable local regulations. Cardboard
packaging materials are raw materials which can
be recycled or reused.
At the end of the equipment’s service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior
notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
Symbols
The following symbols are used in this manual and
on the product:
Always handle this power tool with
particular care
Keep open flames away from the power
tool and the fuel can
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
No-one else may remain in the vicinity of
the motor appliance whilst it is operating.
A breathing mask should be worn when
using poisonous chemicals
Pesticides can be flammable.
Never smoke near the power tool or
where the equipment is refuelled!
Switch off engine
Fuel mixture
Choke open
Operation and warm start
Choke closed,
Cold start position
Type plate
a: Type designation
b: Serial number
c: Build year (08 Î 2008)
To Next Page
Need help?
General
