Regular Checks & General Maintenance
Tyres
If the tyres show any signs of cracking,
punctures or wear, the tyres should be
replaced as soon as possible; please
contact your authorised dealer if you
require replacement parts and/or
installation.
2
Disc Brake
Check and adjust the disc brake regularly
to ensure the scooter brakes effectively and
under control. The tightness of the brake
can be adjusted manually:
Step 1 - Loosen the fitting screw on the
brake shaft.
Step 2- Adjust the length of cable; shorten
the excess cable to loosen the brake,
lengthen the excess cable to tighten the
brake.
Step 3 - Tighten the fitting screw back up
and test the brake response; readjusting by
repeating these steps until the desired
tightness is achieved.
1
2
3
To Next Page
Loading...
