Do not use WD-40 or similar
rust-restistant oils to lubricate
parts
Maintenance
Lubrication
Use a small amount of lubricating oil in the
lever sleeves on the handlebars.
Brakes
When brake effectiveness begins to fall, the
brake cables can be tightened using the
regulators on the handles.
In the event that tightening lines does not
improve braking, or braking is noisy, the
discs or pads may need replacing.
Do not lubricate wheels or any other part of the scooter; in the
event of issues on other areas of the scooter please contact your
authorised dealer for furhter advice and support
If you are unsure about any aspect of maintenance, or you require
replacement parts, please contact your authorised dealer for
furhter advice and support
6
To Next Page
Loading...
