Why won't my Solt Dryer start?
The dryer might not start because the plug isn't firmly in the power socket, or the power outlet isn't switched on. Check the power point using another portable appliance. Also, check your fuse box to ensure a safety switch hasn’t been tripped. Finally, make sure the dryer door is fully closed.
What to do if my clothes are still wet after using my Solt GGSVD7?
If your clothes are still wet after a drying cycle, it could be due to several reasons. First, the selected drying time may have been insufficient, so try selecting a longer time setting. If the room temperature is 12ºC or less, a longer drying time may be needed. Also, a blocked lint filter can cause this issue, so ensure the lint filter is clean. Finally, ensure that you have read all the instructions carefully.
What to do if my Solt GGSVD7 Dryer shows error E1?
Error E1 indicates that the dryer temperature internally is too hot. This may be because the dryer has been overloaded, ventilation is blocked, or the lint filter is blocked. Switch off the dryer (un-plug), open the door and ensure the load is correct. Ensure that the lint filter is clean and that the dryer can ventilate correctly.
What does error E2 mean on my Solt GGSVD7 and how to fix it?
Error E2 indicates a temperature sensor error. Try switching the dryer off, unplug it, and leave it for 15 minutes. Then, reconnect the appliance to see if the fault is fixed.
What does error E3 mean on my Solt GGSVD7 and how can I resolve it?
Error E3 indicates a temperature sensor error. Try switching the dryer off, unplug it, and leave it for 15 minutes. Then, reconnect the appliance to see if the fault is fixed.
To Next Page
General
