2. MAIN FEATURE:
Line-Interactive structure.
Microprocessor based design.
‘Green Power’ design with auto on/off function.
RS-232 interface for communication.
Protection for overload, short circuit, & over heat.
Pure sine wave output.
Zero Transference.
3. CAUTION:
The UPS is designed to power computer loads and the associated peripheral devices,
such as monitors, modems, external H-Disk drivers, etc. To ensure the performance
of the UPS, Do Not load the UPS with laser printer, motor, or any type of inductive
load.
Connecting the UPS to a two-pole, three-wire grounding mains receptacle.
Connection with any other type of receptacle may result in a shock hazard and may
violate local electrical codes.
Do not allow water or any foreign object to get inside the UPS. And do not put objects
containing liquid on or near the unit.
Keep UPS away from fire or heating sources.
To Next Page
Loading...