INTRODUCTION
We appreciate the deference to our brand and we hope will be of great use the newly acquired starter. This manual
contains information and warnings necessary for proper use within the maximum safety for the operator. In case of
misunderstanding or concerns about this manual, please get in touch with us. Please refrain from performing any work
on the starter (only technically qualified personnel authorized by Solter Soldadura S.L. can do it). The manufacturer
declines all responsibility for negligent practices in the use and / or handling. This manual should be attached and
stored with the acquired starter. It is the responsibility of the people who use and repair, the product will not fail to meet
the requirements of these standards.
CHARGING LT-32 PRO STARTER
1 – Connect the mains charger to a network socket.
2 – Connect the other end of the charger to the 15V 1A input port of the starter.
To Next Page
Loading...
