Need help?Do you have a question about the SOLTRON XS-35 KISS*** and is the answer not in the manual?
Explains various symbols used in the manual, including danger, warning, and information notes.
Details the EC and Low-Voltage Directives the device complies with.
Specifies the device is for commercial use and outlines user restrictions.
Covers electrical connection, assembly, and operational safety requirements.
Highlights that devices are intended for the European market and not for USA/Canada.
Details cleaning of the device, including disinfection and acrylic glass surfaces, and recommended cleaners.
Instructions for cleaning UV lamps, filter panels, and plastic surfaces.
Emphasizes de-energizing the device and handling it safely during maintenance.
Stresses the importance of using only genuine spare parts for safety and conformity.
Detailed steps to safely de-energize the device and prevent accidental restart.
Explains how error codes appear on the display for fault localization.
Provides solutions for device not working, overheating, and lamp issues.
Details the characteristics and unavoidable imperfections of acrylic glass panels.
Warns about the fire hazard of non-approved high-pressure lamps and proper installation.
Outlines the JK Corporate Group's commitment to environmental standards and audits.
Provides guidance on the proper disposal of lamps, batteries, and the device as per regulations.
Advises removing make-up and discusses the effect of medications on UV sensitivity.
Recommends protective goggles and discusses UV protection for contact lens wearers.
Warns about risks for sensitive skin types, individuals with skin conditions, and eye protection.
Advises caution with certain medications and cosmetics that increase UV sensitivity.
Specifies the minimum time between tanning sessions (at least 48 hours).
Provides recommended tanning times based on skin type and device model.
Details the initial startup sequence and settings during the first use of the device.
Explains how to set the tanning duration without a coin device.
Describes how to switch UV lamps off and on during a tanning session.
Instructions for switching the facial tanners on and off.
Guidance on how to adjust the fan speed for comfort.
Outlines the schedule for cleaning the device components and filters.
Details replacement intervals for UV lamps and filter plates.
Instructions on how to read the operating hours counter for the sunbed base.
Step-by-step guide for replacing UV low-pressure lamps in the sunbed base and canopy.
Detailed procedure for replacing UV high-pressure lamps for facial tanners.
Instructions for cleaning or replacing filters in the sunbed base and canopy.
Guidance on adjusting the canopy closing mechanism for proper operation.
To Next Page
General
