How to fix SolutionAir Heating System that does not switch on?
If your SolutionAir Heating System does not switch on, check the main switch and the electrical connections to ensure there is voltage.
What to do if my SolutionAir elicent REC-Duo 100 Heating System remote control doesn't work?
If the remote control for your Plus RC version of the SolutionAir Heating System is not working, you should check the status of the battery.
What to do if SolutionAir elicent REC-Duo 100 impeller does not turn?
First, check that its movement is not obstructed. This device is equipped with a manual reset protection system that in the event of a mechanical obstruction in the rotation will switch off the engine. To restore normal operation: 1. Disconnect the device from the power mains upstream. 2. Remove the cause of the mechanical obstruction (only qualified personnel). 3. Reconnect the device to the power mains. The device will only resume normal operation if the protection system does not detect any additional faults. If the fault persists, contact the client support service.
Essential instructions to prevent serious injury, death, or appliance damage if not strictly followed.
Addresses appliance start-up failures, impeller obstruction, synchronization problems, and remote control issues.
Instructions for environmentally sound disposal and recycling of the unit according to regulations.
Details the heat recovery unit's function, including the ceramic exchanger and Push-Pull operation.
Illustrates and explains the 60-second alternating extraction (Push) and intake (Pull) cycles for heat exchange.
Provides specific dimensions for the main ventilation unit, external vent, and external cowling.
Lists all items provided in the product packaging, with detailed descriptions and references.
Diagram illustrating the installation process with key components and important notes for correct fitting.
Guidelines for selecting the optimal location for the unit, considering height, structure, and environmental factors.
Instructions for installing the wall bracket, drilling the hole, and fitting the external waterproof membrane and cowling.
Guidance on planning wiring, making electrical connections, and installing power supply components.
Steps for installing the external vent, ceramic core, and power supply plate cover.
Presents wiring diagrams for 24h/7d operation for REC-Duo 100 and REC-Duo 100 MHY/RC PLUS models.
Details on inserting the REC-Duo unit into the duct and completing external cladding according to standards.
Instructions for setting the timer (TM) to control extraction operating time, adjustable from 0 to 30 minutes.
Guidance on adjusting the humidistat (HY) for automatic speed changes based on humidity thresholds.
How to select speed settings for REC-Duo 100/MHY via jumper and for PLUS RC via remote control.
Instructions for pairing multiple units, synchronizing operations, and unpairing devices.
Procedures for pairing the remote with ventilation units and unpairing them from the system.
Details on activating the remote and a description of all its buttons and their respective functions.
Covers restoring factory settings, adjusting speed limits (1 & 2), and controlling LED intensity.
Details the 24h/7d operation, manual boost, and boost duration settings for the REC-Duo 100 model.
Explains 24h/7d operation, manual boost, and humidity control features for MHY and PLUS RC models.
Provides a comprehensive guide to LED indicators and their meanings for different unit statuses and models.
Outlines cleaning steps, prohibited cleaners, and recommendations for filter maintenance and replacement.
Step-by-step instructions to reset the filter indicator light after cleaning or replacing filters.
Provides contact details, including email and phone number, for customer support.
General| Brand | SolutionAir |
|---|---|
| Model | elicent REC-Duo 100 |
| Category | Heating System |
| Language | English |
To Next Page
