Connect Headphones to Device via Bluetooth (Compatible
with Smartphone)
1. Long press the headphone power button for 2 seconds, release
the button after the light is always on, and the headset powered
on successfully.
2. When the power on is successful, the headset automatically
enters the pairing state, and the power on indicator light will
rapidly blink blue.
3. Open the Bluetooth settings when you connect the headset for
the first time, search and select the device"SOMIC STINCOO
GS510", and the power-on indicator will be solid blue after the
connection is successful (The headset will automatically connect
to your phone after being paired the first time)
4. If the connection fails, it will automatically enter the re-pairing
mode. If there is no device available within 3 minutes, the headset
will automatically shut down.
★
Notes:
If connection fails, please try again after fully charging.
Connect Headphones to Device via USB Transmitter
(Compatible with PC, PS5, PS4, PS4 Pro, Laptop, MAC)
Automatic Connection
1. Insert the USB transmitter into the USB port of you device, the
blue indicator of the USB transmitter flashes.
2. Long press the power button for 3 seconds to turn on the
headset, when the headset light is on, and the power is successful.
3. The USB transmitter automatically connect to the headset.
When the Blue light of the USB transmitter is always on, the
connection is successfully.
4. If automatic connection fails, please try the below way.
Manual Connection
1. Turn on the headset. Then insert the USB transmitter into the
USB port of you device and the blue indicator of the USB
transmitter flashes.
2. Insert a small pin into the reset hole (next to the LED indicator)
on the USB transmitter, then push in for 2 seconds until the LED
light rapidly blinks blue.
3. The USB transmitter automatically connect to the headset.
When the Blue light of the USB transmitter is always on, the
connection is successfully.
★
Notes:
1. If connection fails, please try again after fully charging.
To Next Page
Loading...