SOMMER RDC vision - Photocell Connection

2.1 Scope of delivery
• Control
• Installation and operating instructions
• 1 x resistor, 8.2 kOhm
• 2 x cable bushings, large
• 6 x cable bushings, small
• 2 x strain reliefs for connecting cord
• 4 x bridges for safety inputs (pre-assembled)
When unpacking, please check that all the contents are complete and
show no visual signs of damage. Contact your specialist retailer/
supplier if necessary.
Disposal of any packaging should comply with any applicable local
regulations.
2.2 Technical data
Nominal voltage ........................................................230 V AC ± 10%
Nominal frequency ....................................................50/60 Hz
Operating temperature range....................................-20 – +50°C
Protection class.........................................................IP 20 *)
Standby power consumption.....................................~ 4 W
Maximum motor output .............................................~ 600 W
Lighting/warning light ................................................230 V AC
Internal...........................................................max. 15 W, E14
External .........................................................max. 40 W
Weight.......................................................................0.8 kg
Dimensions (H/W/D) ................................................295 / 150 / 81 mm
Receiver memory capacity........................................112 commands
*) Only if installed indoors
2.3 Storage
Store the control unit:
• in closed, dry rooms at a room temperature of -20 to +50°C and
humidity of approx. 35% to 60%;
• in a dry, dust-free location where it is safeguarded against impact
and/or falling.
RDC vision
en8