SOMMER RDC vision - Page 10

10
8. Checking the safety devices
Activate the safety contact strip or the photocell
while moving the door to the CLOSE position.
ThedoormustchangedirectiontoOPENin
all cases.
This check must be repeated for all connected
safety devices.
DIPswitches3and4canbeusedtocongure
whether a door opens fully or only partially
after it encounters an obstacle.
For more information, see overall manual,
chapter:
6.15 5.2 Operator response to detected
obstacle on page 24
Brief instructions
(only use in combination with the original Installation and Operating Manual)