What to do if a recording cannot be transferred from SOMNOmedics Blood Pressure Monitor?
If a recording cannot be transferred from the SOMNOtouch™ Blood Pressure Monitor because the hard disk reports insufficient memory, archive all recordings and then delete them from the hard disk. If this is not the case, ensure that you have the correct rights to save data; contact your System Administrator if needed.
Why pre-programmed measurement does not start on SOMNOmedics Blood Pressure Monitor?
If the pre-programmed measurement on your SOMNOmedics Blood Pressure Monitor does not start, check the date and time on your PC and correct them if necessary.
What to do if one channel was not recorded on SOMNOmedics Blood Pressure Monitor?
If one channel was not recorded on your SOMNOmedics Blood Pressure Monitor, check the montage and make sure the channel is selected.
Describes the intended use of the SOMNOtouch™ NIBP for recording physiological signals and diagnosing cardiovascular disorders.
Explains the importance of reading the manual, especially sections with warning icons indicating potential dangers.
Details the meaning of symbols used in the manual, including hints, tips, and warnings for patient safety.
Specifies the age range and patient exclusions for using the SOMNOtouch NIBP and its components.
Provides guidance on checking the model and device number upon unpacking and comparing it with the delivery note.
Describes the function and status indicators of the device's buttons and LEDs.
Lists the components included in the SOMNOtouch™ NIBP package and the available channels for recording.
Explains the principle of blood pressure determination using Pulse Transit Time (PTT) and necessary analysis parameters.
Details the process of updating the software version and choosing installation types.
Provides step-by-step instructions for installing the docking station driver on Windows 7.
Provides step-by-step instructions for installing the docking station driver on Windows 10.
Explains the process of initializing the device, including PC and direct display initialization.
Details how to start a measurement directly on the device display, including sensor application.
Provides instructions on how to correctly apply the device wristband, ECG electrodes, and SpO2 sensor.
Describes the mandatory step of performing a manual blood pressure measurement for calibration.
Explains the information displayed on the screen during recording and how to access settings.
Details how to adjust device settings such as Bluetooth, Sound, Display, and Language.
Explains the procedure for transferring recorded data from the device to a computer.
Describes the process and requirements for updating the device firmware.
Guides users on how to open and manage recorded measurements within the DOMINO light software.
Covers various analysis functions like blood pressure calibration, defining measurement periods, and using plots.
Explains how to select and generate reports using different templates.
Lists the minimum and recommended system requirements for running the DOMINO light software.
Describes the icons and functions available on the DOMINO light software panel.
Explains how to configure global settings, including folder management and registration.
Details how to configure channel display settings like color, scaling, and order.
Covers the configuration of built-in analysis algorithms and display settings.
Explains how to format the analysis window presentation and adjust channel settings.
Details how to apply filters (Highpass, Lowpass, Notch) to specific signals.
Describes how to set keyboard keys for manual editing of events and markers.
Explains how to add, rename, and delete markers to indicate events within a measurement.
Details how to define custom areas for analysis and how detected events are itemized in reports.
Covers the entry of user information and logo customization for report headings.
Explains how to configure report templates, set contents, format, and order of report items.
Details how to set analysis and channel parameters directly or via Global Preferences.
Describes functions accessible via pop-up windows in the Analysis and Raw Data views.
Explains the different display layouts selectable for efficient data processing.
Provides instructions on how to place markers in the Raw Data window at specific positions.
Explains how to manage markers, including adding, editing, deleting, and hiding them.
Details how to select and save interesting events as samples for reports.
Describes how to open and view the event list for analysis.
Introduces the four techniques for manually editing events in the Raw Data: Edit, Quick Edit, Select Edit, and Repeat Modes.
Explains the two methods for generating reports using the DOMINO light software.
Describes the facility to generate form letters for sending diagnostic information.
Provides a step-by-step guide on creating new form letters and selecting fields.
Details options for exporting data in various formats and exchanging data between labs.
Explains how to export analysis and raw data as pictures or data files.
Describes the EDF+ export feature for data exchange between different sleep labs and devices.
Explains how to export ECG data in .scp file format for external analysis programs.
Recommends archiving analyzed recordings regularly and deleting them from the hard drive.
Provides instructions on how to archive data by burning it onto CDs or DVDs.
Explains the recommended weekly archiving procedure for the patient database.
Describes the patient database features, including information, search, and trends.
Explains the requirement for a registration code to use the patient database.
Details how to search for patients and recordings using various criteria.
Covers editing patient data, adding information, and creating PDF documents from historical records.
Explains how to display sleep profiles, analyzed results, and open reports from the recording menu.
Describes the menu that displays summary graphics from the patient's analysis curves.
Specifies the recommended maintenance schedule for the device, including inspection and calibration.
Provides instructions for cleaning and disinfecting the device and its accessories.
Explains the features of the rechargeable battery and proper charging procedures.
Lists the technical specifications of the SOMNOtouch™ device, including channels, processing, and dimensions.
States the expected lifetime of the SOMNOtouch™ device.
Provides guidelines for storing the device and sensors when not in use.
Specifies the requirements for safely transporting the device.
Outlines the recommended environmental conditions for operating, storing, and transporting the device.
Guides users on how to handle and report device malfunctions.
Details the conditions and period covered by the SOMNOmedics warranty.
Provides information on the proper disposal of device parts and the unit according to regulations.
States that information on electromagnetic compatibility is available upon request.
Lists available accessories and spare parts for the SOMNOtouch™ device.
Provides contact information for customer service, support, and technical assistance.
An empty section for user notes.
General| Brand | SOMNOmedics |
|---|---|
| Model | SOMNOtouch NIBP |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page