To LINE IN on
next speaker
To LINE IN on
next speaker
tROUBLESHOOtiNG
- Make sure that all wiring is made with shielded
balanced cable with conductors for plus(+),
ground, minus (-)
- Make sure that all wiring is tightly secured in the
connection blocks.
- Make sure that the contact block containing the
wiring is firmly in place in the speakers corre-
sponding contact block.
- Make sure that all speakers are in “wired mode”.
- Make sure that the wiring is not mixed between
the speakers (+ to +, ground to ground, - to -)
DAISY CHAIN CONNECTION
TREE STRUCTURE
To Next Page
Loading...