Need help?Do you have a question about the Sonalika SOLIS 60N and is the answer not in the manual?
Provides guidance on how to effectively use the operator manual for tractor operation.
Details chassis, engine serial numbers, and statutory plate information.
Information on ROPS plates for platform and cabin tractor models.
Description and location of the tractor's type approval plate.
Explains various universal symbols used on tractor instruments and controls.
Outlines the warranty policy, pre-delivery, and installation requirements.
Details warranty claim procedures and warnings about using non-genuine parts.
Guidance on service after warranty expiry and procedures when moving to a new location.
Introduction to safety precautions and the importance of operator responsibility.
Explains the meaning of safety alert symbols and terms used in the manual.
Emphasizes operator responsibility for safety and understanding instructions.
Defines safety levels indicated by DANGER, WARNING, CAUTION words and safety decals.
Guidelines for following a safety program and adhering to regulations for safe tractor operation.
Explains the function and importance of the Roll Over Protection Structure (ROPS).
Details necessary personal protective equipment and safety preparations before operating.
Importance of knowing tractor equipment, performing pre-operation checks, and using safety devices.
Procedures for cleaning the tractor and protecting the environment from pollution.
Safety measures for servicing the tractor and starting the engine safely.
Following recommended starting procedures and ensuring work safety.
Comprehensive guidelines on safe tractor operation, including hazards and overturn prevention.
Safety precautions and regulations for transporting the tractor on roads.
Safety after operation and understanding risks associated with noise exposure.
Safe handling procedures for batteries and fuel, including avoiding hot exhaust.
Safety guidelines for operating Power Take-Off (PTO) and loader attachments.
Safety precautions for handling agricultural chemicals and limited use in forestry operations.
Safety measures during lightning storms and information on noise and vibration levels.
Identifies and shows the location of various safety labels on the tractor.
Labels and identifies various controls on the platform tractor's dashboard.
Labels and identifies various controls within the cabin of the tractor.
Details the instrument panels for regular and CRDi engine models, including indicators and gauges.
Identifies dashboard controls like combination switches, ignition, PTO controls, and fuse boxes.
Information on battery, fuse box locations, and trailer/internal electrical sockets.
Describes the function and location of headlights, parking lights, and other tractor lights.
Instructions for adjusting steering wheel height and tilt for operator comfort.
Location of the registration plate and adjustment of the driver's seat for comfort.
Shows the location of the standard tool box provided for maintenance tools.
Guidance on safe procedures for boarding, leaving, and opening the tractor bonnet.
Explains the tractor's safety features related to operator presence and PTO engagement.
Detailed steps for starting the engine, including cold weather considerations and initial running-in.
Instructions for marching the tractor and controlling acceleration using the hand throttle lever.
Procedures for safely stopping the tractor, turning off the engine, and information on the under hood muffler.
Information on clutch operation, gear shifting levers, and catalytic converter (optional).
Operation of gearshift, speed range, shuttle, and PTO control levers.
Detailed explanation of PTO operation modes, safety precautions, and flow charts.
Instructions for using service brakes, parking brake, and optional hydraulic trailer brake.
How to use the differential lock and a chart of ground speeds for various gears.
Engaging the 4WD system and adjusting the maximum steering angle for the front axle.
Procedures for adjusting the front and rear track widths for optimal settings.
Recommendations for checking and maintaining wheels and tyres, including pressure and load.
Methods for adding ballast to front and rear wheels for improved traction and stability.
Details on the three-point linkage components and safe procedures for hitching implements.
Explains hydraulic controls, power lift operations, and valve adjustments.
Information on ROPS for platform tractors and safe procedures for transporting the tractor.
Illustrates the recommended points for safely lifting the tractor with a jack.
A detailed table outlining required maintenance tasks and their intervals.
Procedures for fuel tank filling, filter replacement, bleeding, and water separator maintenance.
Step-by-step guide for cleaning the air cleaner element in different tractor models.
How to check engine oil level and perform oil and filter changes, including recommended grades.
Checking coolant level, draining, flushing, and cleaning the radiator.
Checking power steering oil level and replacing transmission/hydraulic oil filters.
How to check and adjust the free play of the clutch and brake pedals.
Steps for changing oil in the 4WD front axle, rear final drives, and transmission.
Instructions for cleaning the suction strainer in the hydraulic system.
Inspecting hoses, general electrical system upkeep, and battery maintenance.
Inspection and maintenance of the starter motor, alternator, and poly V-belt.
Diagrams and locations of fuse boxes for different tractor models.
Precautionary measures for storing the tractor for extended periods to prevent damage.
A visual guide illustrating all the greasing points on the tractor.
A chart detailing recommended oil grades and capacities for tractor components.
Specifications for CRDi engine, transmission, dimensions, and EU/Non-EU models.
Specifications for Non-CRDi engine, transmission, dimensions, and EU/Non-EU models.
Details on working speeds and sizes for various tractor implements.
Correct and incorrect practices for engine, clutch, transmission, hydraulics, brakes, steering, and tyres.
General advice on electrical system, fuel, performance, and safe operation practices.
Common engine problems, their possible causes, and recommended remedies.
Troubleshooting common issues related to the tractor's hydraulic and brake systems.
Diagnosing and resolving common problems with the tractor's electrical system, starter, and battery.
To Next Page
General