Adjusting a Source
To change the radio station or go to the next track on a CD, etc., follow the
directions given below. Your system installer will be able to provide you with
the specific responses that your audio equipment will give to your commands.
Press and Release:
When an illuminated button is pressed and immediately released, the system will send a
command to the selected source equipment. This command varies with the source equip-
ment but is generally "next station" for a tuner, "next track" for a CD player, "next song" for
a cassette tape. Your installer can tell you how your system is programmed, or you can just
try it out.
Press and Hold:
If you press and hold an illuminated button until all the buttons illuminate, an alternate
command will be executed. This might be "next disc" for a CD, "switch sides" for a cas-
sette, or a favorite preset station for a tuner. Your system installer can tell you how this is
programmed.
For information on system options and accessories, visit our website or contact us at:
Sonance • 212 Avenida Fabricante • San Clemente, CA • 92672-7531
Tech Support: (800) 582-0772 • E-mail: tech@sonance.com
www.sonance.com
33-2068 7.00
The Sound of Sonance
™
To Next Page
Need help?
Audio Specifications
Weight and Dimensions
