Do you have a question about the Sonardyne 8142-000-01 and is the answer not in the manual?
General safety precautions not specific to any installation or equipment.
Information on operating subsea equipment safely and potential hazards.
Description of equipment used in L/USBL and Type 8182 systems.
Details the differences between USBL and LUSBL systems for the Type 8142.
Explanation of how acoustic signals are processed for positioning.
Covers mechanical, electrical, acoustic, and environmental specifications.
Covers mechanical, electrical, acoustic, and environmental specifications.
Instructions on operating the transceivers with specific software packages.
Procedures for cleaning, examining, and storing transceivers.
Steps to prepare for cleaning, examining, or storing transceivers.
Troubleshooting steps for communication issues with the transceiver.
Procedure to check wiring and power status for communication issues.
Overview of the removal process for the specified transceivers.
Procedure for removing the transceiver from pole or over-side mounts.
Steps for performing operational tests on the transceivers.
States that there are no authorised repairs for the equipment.
Instructions for upgrading firmware using Marksman or Ranger 2.
Details tools, weights, consumables, and preparation for installation.
Explains the two methods for mounting the transceiver on a ship.
Overview of acoustic navigation system principles.
Explains the principles of Short Base Line (SBL) systems.
Lists recommended spare parts, assemblies, and cables.
Provides outline drawings for the HPT unit.
Covers preparation and methods for transceiver deployment.
Details the recommended method for deploying from a surface vessel.
Logbook entries for deployment and recovery events.
Logbook entries for servicing performed on the equipment.
| Manufacturer | Sonardyne |
|---|---|
| Category | Transceiver |
| Model Number | 8142-000-01 |
| Beam Width | Omnidirectional |
| Power Supply | 24 V DC |
| Operating Temperature | -5°C to +35°C |
| Power Consumption | 10 W |
| Interface | RS232/RS485 |
Loading...