P. 1
P. 5
P. 2 P. 3
P. 4
Bluetooth®
Speaker
YM-100
Please read these instructions thoroughly
before use and retain for future reference.
Instructions for use
Please read all instructions carefully.
Getting started
• Remove the Bluetooth® speaker & accessories from the box.
• Remove all packaging from the Bluetooth® product.
• Retain instructions for future reference.
• Place the packaging inside the box to either store or dispose of safely.
In the box
• Mini Lightup Wireless Speaker
• Micro USB plug to 3.5mm and USB plug
• Instruction manuals
Features
• Enjoy music wirelessly.
• Every time the speaker turns on, it connects to last connected device
automatically.
• Built-in Lithium rechargeable battery.
• Working time : 2~3 hours
SAFETY INSTRUCTIONS
• Keep the unit away from heat sources,
direct sunlight, humidity, water and
any other liquids.
• Do not operate the unit if it has been
exposed to water, moisture or any
other liquids to prevent against electric
shock, explosion and / or injury to
yourself and damage to the unit.
• Do not use the unit if it has been
dropped or damaged in any way.
• Repairs to electrical equipment should
only be performed by a
qualied electrician. Improper repairs
may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not put objects into any of the
openings.
• Keep the unit free from dust, lint etc.
• Do not use this unit for anything other
than its intended use.
• Keep the unit out of reach of small
children.
• This product is not a toy.
• Do not use abrasive cleaning solvents
to clean.
Instructions for Use
Charging Instructions
• The speaker comes with a built in rechargeable battery before using it
for the rst time it is recommended you charge the battery fully.
• Connect the Micro USB charge cable to a computer USB port or a USB
wall charger (not included). And, connect the Micro USB plug to the
charging slot of the speaker. The Red battery charging LED indicator
illuminates while the speaker is being charged. It takes around 3-5
hours for the unit to fully charge. When the battery is low, you can hear
the indicated sound from speaker, please charge the speaker.
Turning on/off the speaker
There is an on/off switch at the bottom of the speaker. You can turn on/off
the speaker with this switch. In order to save power, put the switch to off
position when the speaker is not in use.
Pairing the speaker with Bluetooth® devices (phone or music device)
• Switch on the speaker, you can hear the indicated sound from speaker.
• Place the speaker and Bluetooth® device (phone or music device) so
that they are no further than 3 feet apart; Activate the Bluetooth®
function on your Bluetooth® device (phone or music device). Please
refer to the manufacturer’s instructions for instructions on enabling
Bluetooth® on your device.
• Once you have activated Bluetooth® on your device, select the speaker
“SONAR076720” from the list of available Bluetooth® devices.
ON / OFF switch
Micro USB charging slot
To Next Page
Need help?
General