EasyManua.ls Logo

Sondpex RUSX123 - User Manual

Sondpex RUSX123
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sondpex Corporation of America
Princeton, NJ 08540, USA
1-877-997-7888
732-940-4430
support@sondpex.com
www.sondpex.com
Car Stereo Receiver and Audio Player
Receptor Estéreo y Reproductor de Audio
para el carro
USER MANUAL AND INSTALLATION INSTRUCTIONS
MANUAL DEL USUARIO E INSTRUCCIONES DE INSTALACIÓN
Model: RUSX123
IMPORTADO POR:
ZONE COMPRA, S. DE R.L. DE C.V.
AVE. GUERRERO No. 2911-B
COL. GUERRERO, NUEVO LAREDO,
TAMPS. MEXICO 88240
TEL: (867)719-26-83
R.F.C. ZCO-980914-I98

Questions and Answers

  • M
    Melissa RiveraJul 31, 2025
    Why is there no sound coming from my Sondpex Car Receiver?
    • S
      Steven JohnsonJul 31, 2025
      If your Sondpex Car Receiver has no sound, first, check if the volume is set to the minimum and adjust it to a desired level. If the volume is not the issue, inspect the wiring connections to ensure they are properly connected.
  • R
    robert08Aug 4, 2025
    What to do if my Sondpex Car Receiver fails to power on?
    • R
      Rachel JohnsonAug 5, 2025
      If your Sondpex Car Receiver fails to power on, ensure that the car ignition switch is turned to the “ACC” position, assuming the power supply is correctly connected to the car accessory terminal. Also, check the fuse. If it's blown, replace it.
  • C
    collinsteresaAug 9, 2025
    How to fix a Sondpex RUSX123 Car Receiver radio that isn't working?
    • V
      vicki61Aug 9, 2025
      If the radio on your Sondpex Car Receiver isn't working, make sure the antenna is properly connected and fully extended. If the connection is correct, try rotating the antenna to find a better signal.
  • D
    dwaynemannAug 15, 2025
    What causes noises and sound distortion in my Sondpex RUSX123 Car Receiver?
    • S
      Sandra LarsonAug 15, 2025
      If you're experiencing noises and sound distortion with your Sondpex Car Receiver, check the speaker cables to ensure they are not pressed by screws. Also, make sure the speaker cables are properly connected and not short-circuited.
  • M
    Matthew MillerAug 19, 2025
    What to do if my Sondpex RUSX123 Car Receiver suddenly stops working?
    • M
      Mia PollardAug 19, 2025
      If your Sondpex Car Receiver stops working, try turning off the power and then powering it on again. If the issue persists, the files might be damaged. In that case, skip the current file and select the next one.
  • J
    Jacob RamosAug 25, 2025
    Why doesn't the automatic radio station selection work on my Sondpex RUSX123 Car Receiver?
    • B
      bestmeredithAug 26, 2025
      If the automatic radio station selection isn't working on your Sondpex Car Receiver, it might be due to weak signals. Try selecting a station manually.

Summary

Caution

Installation

Precautions

Important considerations before installing the unit to ensure proper function and safety.

Step-by-Step Installation

Detailed instructions for physically mounting the car stereo receiver into the vehicle's dashboard.

Dismantling

Procedure for safely removing the front panel and the entire unit from the vehicle.

Specifications

Button and Key Functions

Electrical Connection

Caution for Electrical Connection

Critical warnings regarding power supply, wiring, and connections to prevent damage or hazards.

Warning for Electrical Connection

Serious warnings about incorrect wiring or operation that will void the unit's warranty.

Back Panel Drawing

Wiring Diagram

Troubleshooting

Change the Fuse

Procedure for replacing a blown fuse, including safety checks and troubleshooting.

Connector Cleaning

Instructions for cleaning unit and panel connectors to ensure proper operation.

Sondpex RUSX123 Specifications

General IconGeneral
BrandSondpex
ModelRUSX123
CategoryCar Receiver
LanguageEnglish