SONGLE SRD-12VDC-SL-C User Manual

Manual
Technical parameter:
Working voltage: DA12V (12V/24V optional)
Static working current: ≤10mA
Working temperature: -40℃—+80℃
Receiving sensitivity: ≥-95dB
Working frequency: commonly used 315MHZ, 433.92MHZ (others can be customized)
Output current: ≤10A
Working mode: inching, self-locking, interlocking (adjustable)
Output mode: contact output (can control AC and DC)
Scope of application:
This product is controlled by an intelligent microprocessor, which can be applied to garage door
control, lighting control, remote control curtains, access control systems and various motor
control systems. Small size, easy to install, safe and reliable in use.

SONGLE SRD-12VDC-SL-C Specifications

General

Coil Voltage	12V DC
Contact Configuration	SPDT (1 Form C)
Contact Rating (Resistive)	10A 250VAC / 10A 30VDC
Coil Power	0.36W
Mechanical Life	10, 000, 000 operations
Weight	Approx. 15g
Contact Material	Silver Alloy
Release Time	5ms max
Electrical Life	100, 000 operations
Insulation Resistance	100MΩ min at 500VDC
Ambient Temperature	-40°C to +70°C
Operate Time	15ms
Dielectric Strength	1500VAC for 1 minute

Summary

Technical Parameters

Scope of Application

Product Application Overview

Product controlled by intelligent microprocessor for garage doors, lighting, remote curtains, and motor control systems.

Wiring Diagram

Terminal Explanations

Explanation of power and output terminals (+V, -V, NO, COM, NC) used in the wiring diagram.

Working Mode Description

Jog Mode

Relay activates when remote is pressed and deactivates when released.

Self-locking Mode

Relay toggles on/off with consecutive remote presses.

Interlock Mode

Remote button A activates relay, button B deactivates it.

Delay Mode

Relay activates and then automatically turns off after a set delay (5, 10, or 15 seconds).

Wiring Instructions

Connection Guide

Instructions for connecting power (+/-) and output terminals (NO, COM, NC) to the relay.

For Light Control

Light Control Wiring Examples

Diagrams showing wiring configurations for light control applications (eg.1, eg.2).

Code Management

Clear Data

Procedure to clear learned remote control codes by pressing the learning button 8 times.

Learn to Code: Jog Learning

Method to pair a remote using jog learning: press button once, LED flashes, press remote.

Learn to Code: Self-locking

Method to pair remote in self-locking mode: press button twice, LED flashes, press remote.

Learn to Code: Interlocking

Method to pair remote in interlocking mode: press button 3 times, LED flashes, press remote.

Learn to Code: 5s Delay

Method to pair remote with 5s delay: press button 4 times, LED flashes, press remote.

Learn to Code: 10s Delay

Method to pair remote with 10s delay: press button 5 times, LED flashes, press remote.

Learn to Code: 15s Delay

Method to pair remote with 15s delay: press button 6 times, LED flashes, press remote.