Songmics VASAGLE HSR065

Need help?

Do you have a question about the Songmics VASAGLE HSR065 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document provides assembly instructions and general guidelines for the VASAGLE HSR65/065 garment rack.

Function Description

The VASAGLE HSR65/065 is a garment rack designed for indoor household use. Its primary function is to provide a portable and sturdy solution for hanging clothes and other items. The rack features a base with wheels for easy mobility and a top bar for hanging garments. Adjustable components allow for customization of height or other dimensions, though specific adjustment mechanisms are not detailed in the general guidelines.

Important Technical Specifications

Maximum Load Capacity: 90 kg (when weight is evenly distributed).
Materials: The rack appears to be constructed from metal pipes for the frame and a wooden board for the base.
Mobility: Equipped with wheels for easy movement.
Assembly: Requires assembly using provided screws (M8 x 65 mm, M6 x 35 mm, M4 x 12 mm) and tools (wrench, Allen key).
Dimensions: Not explicitly stated, but the illustrations suggest a standard size for a garment rack.
Components:
- A: Top bar support (x2)
- B: Top bar (x2)
- C: Base plate connector (x2)
- D: Vertical pipe (bottom section) (x2)
- E: Vertical pipe (middle section) (x2)
- F: Horizontal hanging bar (x1)
- G: Base board (x1)
- K: Wheels (x2/x2, implying 4 wheels in total)
- 61: M8 x 65 mm screws (x2)
- 19: M6 x 35 mm screws (x8)
- 26: M4 x 12 mm screws (x6)
- 62: Wrench (x1)
- 41: Allen key (x1)

Usage Features

Indoor Use Only: The product is strictly intended for indoor household use.
Stability: Must be placed on a flat and solid surface.
Mobility: The wheels allow for easy relocation of the rack. When fully loaded, it is recommended to move the rack slowly with the assistance of other people to avoid product damage.
Safety:
- Do not stand or sit on the wooden boards.
- Keep small parts away from children during assembly to prevent ingestion or inhalation.
- Children are not allowed to climb or play on the product to avoid serious bodily injury caused by toppling.
- Keep plastic packaging bags out of reach of children to avoid potential hazards like suffocation.
- Wear gloves during assembly/disassembly to avoid scratches from sharp edges.
Assembly Process:
1. Attach top bar supports (A) and top bars (B) to the base board (G) using M6 x 35 mm screws (19).
2. Attach base plate connectors (C) to the base board (G) using M4 x 12 mm screws (26).
3. Insert bottom vertical pipes (D) into the base board (G).
4. Connect middle vertical pipes (E) to the bottom vertical pipes (D).
5. Attach the horizontal hanging bar (F) to the top of the vertical pipes.
6. Secure the entire structure to the base board (G) using M8 x 65 mm screws (61).
7. Attach the wheels (K) to the base board (G) using the wrench (62).
Compatibility: Match parts and accessories according to the numbers in the manual. If parts do not match, recheck the instructions.
Screw Tightening: During assembly, first align all screws with the corresponding pre-drilled holes and then tighten them one by one.

Maintenance Features

Regular Inspection: Periodically inspect screw tightness. If necessary, re-tighten them to ensure structural integrity.
Cleaning: If water or another liquid is spilled on the product surface, immediately wipe it clean with a dry towel.
Environmental Considerations: Avoid prolonged exposure to humid environments to prevent mold formation. Keep the product away from fire sources, high temperatures, and direct sunlight.
Damage Prevention:
- Do not place hot objects on the product surface.
- Keep the product away from sharp objects and corrosive chemicals to prevent damage.
- If any defective or missing parts are found after unpacking, cease assembly immediately and contact customer service.
- Assemble the item in a spacious area and do not place the unpacked product directly on the ground to avoid product damage.