This document describes the assembly and use of the VASAGLE LET630, a three-drawer nightstand or side table, which also includes an LED lighting system.
Function Description:
The VASAGLE LET630 is designed for indoor use as a storage unit, likely a nightstand or side table, featuring three drawers for organization. A key feature of this model is the integrated LED lighting system, which can be controlled via a remote. The LED system offers various lighting modes and color options, enhancing the ambiance of the room. The product is intended to be assembled by the user following the provided instructions.
Important Technical Specifications:
- Product Type: Three-drawer nightstand/side table with LED lighting.
- Maximum Static Load Capacity: 50 kg (110 lb).
- Dimensions (approximate, based on diagrams):
- Top Panel (A): 335 mm x 401 mm
- Side Panels (B, C): 115 mm x 335 mm
- Back Panel (K): 335 mm x 370 mm
- Drawer Fronts (P): 294 mm x 329 mm
- Drawer Side Panels (L, Q, R): 60 mm x 370 mm (L, Q, R are drawer bottoms, not sides)
- Drawer Back Panels (M, N): 60 mm x 300 mm
- Drawer Bottoms (P): 294 mm x 329 mm
- LED Strip Length: Not specified, but appears to be designed to fit around the top perimeter of the unit.
- Components: Includes various wooden panels (A-R), drawer slides (V), and hardware (screws, dowels, cam locks).
- LED System:
- Power Button: For turning LED lights on/off and toggling switch.
- Remote Control: For adjusting light intensity, color, mode, and speed.
- Power Adapters: Two types shown, implying regional variations or alternative power sources.
- Plastic Pull Tab: Must be removed from the remote control before use.
Usage Features:
- Indoor Use Only: The product is strictly for indoor environments.
- Storage: Three drawers provide ample storage space for various items.
- LED Lighting:
- On/Off Control: Can be turned on/off using the power button on the LED strip or the remote control.
- Brightness Adjustment: The remote allows for adjusting the light intensity.
- Color Selection: Multiple color options are available via the remote.
- Mode Selection: Different lighting modes (e.g., flash, strobe, fade, smooth) can be selected.
- Speed Adjustment: The speed of dynamic lighting modes can be controlled.
- Demo Mode: A demo mode is available to showcase various lighting effects.
- Assembly: Requires user assembly following detailed step-by-step instructions. Gloves are recommended during assembly to prevent scratches from sharp edges.
- Stability: Must be placed on a level, solid ground during use.
Maintenance Features:
- Screw Tightness Inspection: Periodically inspect screw tightness and retighten if necessary to ensure structural integrity.
- Cleaning: In case of accidental spills (water or other liquids), immediately wipe clean with a dry towel.
- Protection from Damage:
- Avoid long-term exposure to humid environments to prevent mildew.
- Keep away from fire sources, high temperatures, and direct sunlight.
- Do not place hot objects on the surface.
- Keep away from sharp, pointed objects and corrosive substances.
- Weight Limit: Do not place overweight items on the product, respecting the 50 kg (110 lb) maximum static load capacity.
General Guidelines and Warnings:
- Read the instructions carefully before use and keep the manual for future reference or transfer.
- Contact customer service if any parts are defective or missing upon unpacking, or if assistance is needed during assembly.
- Assemble the item on a spacious surface to avoid damage to the product.
- Do not stand or sit on the wooden boards.
- Children are not allowed to assemble the product. Keep small parts out of reach of children during assembly to prevent choking hazards.
- Children are forbidden to climb or play on the product to avoid serious bodily injury from toppling.
- Keep plastic packaging bags out of reach of children to avoid suffocation.
- The seller is not responsible for injuries or damages caused by incorrect assembly or improper use, or if the product has been modified from its original design.