TECHNICAL SPECIFICATIONS
Power 100 watts/channel (peak power)
50 watts RMS at I kHz
(40 ma. bias, I channel driven)
Frequency Response 4 Hz to 50 kHz + 3.0 dB
(1 watt)
Input Impedance 40 Kohms (Normal) 80 Kohms (Direct)
Input Sensitivity .40V RMS at 1 kHz for 45 watts
Power Requirements 250 VA 50/60 Hz (Maximum)
Fuse Requirements 2 1/2 Amp 250V slo-blo - 100V to 120V Countries
1 1/4 Amp 250V slo-blo - 200V to 240V Countries
Tube Complement 2 MP - EL34/E34L 1 - 12AT7A 2 - 12AU7A
Dimensions 19 in. Wide x 17 in. Deep x 7.5 in. High
Weight 60 lbs. (27 kg) - unpacked
NOTE:All specifications based on the use of factory supplied tubes.
6
To Previous Page
Loading...
